Asking For Installation - Mitsubishi Electric HC910 User Manual

Asking for installation

Asking for installation
To view images projected by the ceiling-mounted
projector from the front:
When the projector is installed on the ceiling, the
special ceiling mount bracket, which is separately
sold, is required. Be sure to ask a certifi ed installation
specialist for installation of the projector. Contact your
dealer for details.
• Mitsubishi assumes no responsibilities for any
damage caused by use of other manufacturer's
ceiling bracket and by inadequate installation
conditions even within the warranty period.
• When installing the projector on the ceiling, set
IMAGE REVERSE in the INSTALLATION menu to
MIRROR INVERT.
• Ask your installation specialist to provide a breaker.
When you do not use the projector, be sure to shut
down the main power by the breaker.
• When the projector is installed on the ceiling,
projected images may appear darker than those
projected when the projector is installed on the
fl oor. This symptom is not a malfunction.
• Do not install the projector where the exhaust vents
are exposed to air emitted by an air conditioning.
Such installation may cause a breakdown.
• Do not install the projector near a fi re alarm
because it emits hot air from its exhaust vents.
Dimension Drawings (unit : mm)
EN-28
310
To view images projected on the translucent screen
from behind:
Be sure to ask a certifi ed installation specialist for
installation of the projector. Contact your dealer for
details.
• To view images projected from behind the screen,
set IMAGE REVERSE in the INSTALLATION menu
to MIRROR.
COMPONENT VIDEO IN
S-VIDEO IN
VIDEO IN