Table of Contents
Advertisement
Using the remote control
Operational range of the remote control
Front of projector
About 40 ° About 40 °
Operate the remote control
within a distance of about 10
m (30 feet) from the projector,
pointing the IR beam at the
remote control photo-sensor
(front or rear) of the projector.
Reception angle
Vertical directions
About 30°
About 10°
Vertical directions (ceiling mount)
About 30°
Rear of projector
About 40 ° About 40 °
When operating the remote control, keep the distance
from the remote control to the projector via the screen
within about 5 m (15 feet). The operable range of the
remote control, however, depends on the characteristics
of the screen.
EN-9
• Keep the remote control photo-sensor out of direct
sunlight or fluorescent lamp light.
• Keep the remote control photo-sensor at least 2 m
(6 feet) away from fluorescent lamps. Otherwise,
the remote control may malfunction.
• If there is an inverter-operated fluorescent lamp
near the remote control, the remote control
operation may become unstable.
• When you use the remote control too close to the
remote control sensor, the remote control may not
work correctly.
• A remote control may operate improperly while
you watch the 3D images, however, it is not a
malfunction.
• When a remote control operates improperly while
you watch the 3D images, switch Remote Position
in the Setup menu to Front or Rear.
About 30°
About 10°
About 30°
Advertisement
Table of Contents
