Table of Contents
Advertisement
Recording Techniques (Cont.)
4. Turn JOG to select the day you want, and turn SHUTTLE to
the right.
5. Turn JOG to select the month you want, and turn SHUTTLE
to the right.
Repeat steps 3 to 5 to set 2 or more days at once.
6. Press MENU button.
•
The day and present time display appears on screen.
Info.
•
To erase the pre-set month and day, turn SHUTTLE to the
left while the day item is flashing.
Special day of the week
Set the recording period by specifying the start and end day of
the week for timer recording.
1. Display <TIMER PROGRAM> menu.
2. Turn JOG to select SPECIAL DW and
turn SHUTTLE to the right.
3. Turn JOG to set the start and end day
of the week, and turn SHUTTLE to the
right.
4. Press MENU button.
•
The day and present time display appears on screen.
Note
•
Start day of the week and end day of the week cannot be
identical.
When the recording period of 2 or more programs are
overlapped
The VCR always gives priority to the higher-numbered program.
Info.
•
To make sure that the HOLIDAY SET UP setting is applied
correctly, set a timer program with HLD in DW column to the
higher-numbered program.
Alarm Recording
If an alarm occurs, the VCR switches to alarm recording.
Example)
When ALARM REC MODE is set to L24H and
ALARM REC DURATION is 10 min.
page 19 for alarm recording connection
1. Press MENU button.
•
<MAIN MENU> appears.
2. Turn JOG to select RECORDING SET
UP and turn SHUTTLE to the right.
•
<RECORDING SET UP> menu
appears.
3. When the cursor (
) is next to
ALARM REC MODE, turn SHUTTLE
to the right.
4. Turn JOG to set the alarm recording
mode you want and turn SHUTTLE to
the right.
5. Turn JOG to select ALARM REC
DURATION and turn SHUTTLE to the
right.
12
Advanced Functions
6. Turn JOG to set the alarm recording
7. Press MENU button.
•
•
<TIMER PROGRAM>
PROGRAM TO RECORD
HOLIDAY SET UP
SPECIAL DW
MON-SAT
•
•
•
Emergency Recording
The VCR automatically starts an alarm recording when an alarm
signal is input even if the VCR is in stop mode, turned off or in
stand-by for timer recording. After an emergency recording, the
VCR automatically returns to its original state. Providing
EMERGENCY REC is ON, the Emergency Recording indicator
(
1. After step 6 of Alarm Recording , turn
2. Turn JOG to select ON and turn
Alarm signal input
L24H
Recording
Display during alarm recording
Recording
Alarm Recording
• During the alarm recording, the alarm
10 min
<MAIN MENU>
DISPLAY
TIMER PROGRAM
• The Alarm Recording indicator (
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
<RECORDING SET UP>
ALARM REC MODE
4H
• The alarm recording counter shows up
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
• When initialising the alarm recording
<RECORDING SET UP>
ALARM REC MODE
4H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
<RECORDING SET UP>
ALARM REC MODE
L24H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
<RECORDING SET UP>
ALARM REC MODE
L24H
ALARM REC DURATION
1M
EMERGENCY REC
OFF
CLOG DETECT
ON
Note
duration you want and turn SHUTTLE
to the right.
•
When set to MAN 1, alarm
recording continues until RST IN
terminal is grounded.
•
When set to MAN 2, alarm
recording continues while ALM IN
terminal is grounded.
•
The day and present time display appears on screen.
Info.
The index signal is automatically recorded when an alarm
recording begins. (The Index indicator (
the fluorescent display).
Even if an alarm recording is proceeding, the new alarm
recording starts when the next alarm signal is input. (While
an index signal is being recorded and then the next signal is
input, the second signal may not be detected during skip or
index search.)
An alarm recording continues till its end during timer
recording, even if the timer recording end-time reaches.
An alarm recording will be cancelled if the tape reaches its
end.
If the interval between two alarm recording start-times is too
short, the skip or index search may not function correctly.
(
for the minimum interval between two alarm recording
start-times, go to page 17)
) illuminates on the fluorescent display.
JOG to select EMERGENCY REC
and turn SHUTTLE to the right.
SHUTTLE to the right.
recording counter will automatically be
displayed on screen if DISPLAY MODE
(
page 23) is set to 1, 2 or 3.
on the fluorescent display flashes
during alarm recording and stays on
when the alarm recording is finished.
to 9999 alarm recordings, then it is
reset to 0000 and continues counting.
list, the alarm recording counter will
also be reset.
A point to notice
Info.
<RECORDING SET UP>
ALARM REC MODE
L24H
ALARM REC DURATION
10M
EMERGENCY REC
OFF
CLOG DETECT
) flashes on
<RECORDING SET UP>
ALARM REC MODE
L24H
ALARM REC DURATION
10M
EMERGENCY REC
CLOG DETECT
Alarm recording counter
01-01-'01 09:30:00 A0001
)
Supplementary information
ON
ON
ON
Advertisement
Table of Contents
