Setting The Menus; Menu Chart - Mitsubishi HS-1096E Installation And Operation Manual

Setting the Menus

Menu Chart

The Day and Present Time Display
01-01-'01 16:26:48
<MAIN MENU>
DISPLAY
TIMER PROGRAM
RECORDING SET UP
REAR TERMINAL
MAINTENANCE
CLOCK/FIRST TIME SET UP
Use JOG to select,
and ENTER.
Press MENU to exit.
Set the menus by the following steps.
1. Press MENU button.
• <MAIN MENU> appears.
2. Turn JOG to the left or right to select the desired item.
• When turned to the right, the cursor moves downward.
• When turned to the left, the cursor moves upward.
3. Turn SHUTTLE to the right.
• The desired item is selected and the menu appears.
4. Turn JOG to the left or right to select item.
5. Turn SHUTTLE to the right, then the setting item flashes.
6. Turn JOG to the left or right to change the setting.
7. Turn SHUTTLE to the right to set.
8. Press MENU button.
• The day and present time display appears.
22
Installation
<DISPLAY>
DISPLAY MODE 2
TIME DATE SIZE SMALL
BLUE BACK OFF
e.g.<MODE 2>
01-01-'01 MON
00:00:00 L18
<TIMER PROGRAM>
PROGRAM TO RECORD
HOLIDAY SET UP
SPECIAL DW MON-SAT
<RECORDING SET UP>
ALARM REC MODE 3H
ALARM REC DURATION 1M
EMERGENCY REC OFF
CLOG DETECT OFF
<REAR TERMINAL>
CALL OUT WRNG•TAPE END
CLOCK OUT REC- 1
MODE OUT REC
REC IN SERIES
<MAINTENANCE>
POWER LOSS LIST
ALARM LIST
ALL MENU INITIALISE
POWER LOSS LIST CLEAR
ALARM LIST CLEAR
<REPEAT REC TIMES> 0
<ELAPSED TIME> 0H
<FIRST TIME SET UP>
TIME DATE ADJUST
TAPE END STOP
QUASI V-SYNC ON
VIDEO MODE COLOUR
TAPE LENGTH E-180
BUZZER WRNG
Note
<PROGRAM TO RECORD>
DW START END HR
1 DAY 12:00 15:00 L30LP
2 TUE 12:00 15:00 L18LP
3 WED 12:00 15:00 3SP
4 THU 12:00 15:00 3SP
5 FRI 12:00 15:00 L30LP
6 HLD 12:00 15:00 SKIP
7 SUN 12:00 15:00 L30LP
8 SPL 20:00 22:00 SKIP
<HOLIDAY SET UP>
01/01 15/01 11/02 22/03
29/04 03/05 04/05 05/05
20/07 15/09 23/09 10/10
03/11 23/11 23/12 - - / - -
- - / - - - - / - - - - / - - - - / - -
DAY/MONTH
<TIME DATE ADJUST>
DAYLIGHT SAVINGS OFF
MONTH 01
DAY 01
YEAR 2001
TIME 00:00:00
JOG dial
MENU button
SHUTTLE ring
A point to notice
Info.
<POWER LOSS LIST>
01 01-01-'01 00:00
02
03
<ALARM LIST>
0001 01-01-'01 00:00
0002
0003
0004
0005
0006
0007
0008
ALL MENU INITIALISE
Turn the SHUTTLE RING
then all MENU will be
initialised.
POWER LOSS LIST CLEAR
Turn the SHUTTLE RING
then POWER LOSS LIST
will be cleared.
ALARM LIST CLEAR
Turn the SHUTTLE RING
then ALARM LIST will be
cleared.
Supplementary information