To Programme With The G-Code Function - Panasonic NV-HS960AM Operating Instructions Manual

To Programme with the G-code
Function
The G-code numbers assigned to each TV programme and
published alongside the TV programme listings in
newspapers and magazines make it extremely easy to set the
VCR for timer recording.
The duration of a timer recording programmed with G-code
number may be slightly longer than the actual duration of the
TV programme.
Preparations
≥ Confirm that the VCR is on.
≥ Confirm that the TV is on and the VCR viewing channel is
selected.
≥ Insert a video cassette with an intact erasure prevention
tab.
As soon as the cassette is inserted, the Cassette Number
Check starts. Wait a few moments until it is completed.
(See page 14.)
≥ Set the VCR/TV switch
Example:
Programming a timer recording of a TV programme with the
G-code number 920126
Operations
1
Press the G-CODE button
for entering the G-code number on the TV.
2
Press the Numeric buttons
number.
≥ If you have entered a
wrong digit, press the
Cursor button (2)
then enter the correct digit.
3
Press the OK button
content.
4
Press the SP/LP button
speed.
≥ SP provides standard
recording time and optimum
picture quality.
LP provides double
recording time with slightly reduced picture quality.
EP provides triple recording time with slightly
reduced picture quality.
Regarding the "A" indication, refer to page 23.
≥ To extend the ending time or to make any
corrections, use the Cursor buttons (3421)
the Channel buttons
button , the OFF button
5
Press the TAPE button
corresponding cassette tape length.
≥ The tape length is displayed on the VCR display.
22
to "VCR".
to display the menu
to enter the G-code
On Screen Display
G-code
and
9 2 0 1 2 6
to display the programmed
to set the desired tape
Timer recording
Pos Start Stop SP VPS
Name DATE ON OFF LP
ZDF 27/10 We 20:00 21:30 SP
: :
jjjjj jj/jj jj jj jj jj jj jj
: :
jjjjj jj/jj jj jj jj jj jj jj
: :
jjjjj jj/jj jj jj jj jj jj jj
: :
jjjjj jj/jj jj jj jj jj jj jj
jjjjj jj jj jj jj jj jj jj jj
jjjjj jj jj jj jj jj jj jj jj
jjjjj jj jj jj jj jj jj jj jj
, the DATE button , the ON
, the SP/LP button
to select the
6
Press the OK button
settings.
≥ To programme additional
timer recordings, repeat
operation steps 1–6.
7
Press the TIMER REC button
over to the timer recording standby mode.
≥ Check that "Á" is lit on the VCR display.
If it is flashing, check the timer recording details
again. (See page 23.)
When "– –" Appears under "Pos/
Name" after Entering a G-code Number
Pos/Name stands for Programme Position/TV Station
Name.
Normally, the name of the TV station or the number of
the programme position is displayed under "Pos/Name".
In such a case, follow the operation steps below to
correct it.
Press the Channel buttons
repeatedly to select the
programme position on which
the TV programme to be
recorded will be broadcast.
After you have entered the information of a TV station,
it remains stored in the VCR's memory, and you do not
need to enter it again in the future.
To Suspend the Timer Recording Standby
Mode
See the previous page.
Note:
≥ If the VCR is not put in the timer recording standby mode at
the latest 10 minutes before the programmed timer
recording starting time, the "Á" indication flashes on the
VCR display. In this case, press the TIMER REC button
to put the VCR in the timer recording standby mode.
Min
ON 90
jjj jjj
jjj jjj
jjj jjj
jjj jjj
jjj jjj
jjj jjj
jjj jjj
,
.
again to conclude the
Timer recording
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
ZDF 27/10 We 20:00 21:30 SP ON
: :
jjjjj jj/jj jj jj jj jj jj jj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj
to switch the VCR
Timer recording
Pos Start Stop SP
Name DATE ON OFF LP Min
15:00 17:00 SP 120
jj jjjjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
jjjjj jj jj jj jj jj jj jj jj jjj jjj
jjjjj jj jj jj jj jj jj jj jj jjj jjj
"– –" indication
Min
90
jjj
jjj
jjj
jjj
jjj
jjj
jjj