Panasonic NV-HS960AM Operating Instructions Manual page 20

To Manually Adjust the Audio Recording
Level
This VCR adjusts the recording level automatically to prevent
sound distortion due to excessive peaks.
However, if you want to manually adjust the audio recording
level, perform the operation steps below before you start the
actual recording. We recommend you to adjust the level so
that it peaks at approximately i4 dB on the recording level
indicator.
1 Before recording, press the
AUDIO button .
2-a To adjust the left (L) and right
(R) channels simultaneously:
Press the Cursor buttons (21)
to adjust the audio recording
level.
2-b To adjust the left (L) and right (R) channels individually,
use either of the following two operation methods:
Press the Cursor buttons (34)
left (L) or right (R) channel and individually adjust their
audio recording level with the Cursor buttons (21)
Press the AUDIO button
the left (L) or right (R) channel and individually adjust
their audio recording level with the Cursor buttons (21)
.
Example:
When the left (L) channel is selected.
≥ Adjusting the audio recording level of the normal audio
track (mono) is only possible when recording from an
external source, but not when recording TV
programmes via the VCR's built-in tuner.
3 Press the EXIT button
20
On Screen Display
Audio Rec Level (Stereo)
L
R
–¶ 40 25 12 3 0 3 6
9 r12 dB
Audio Rec Level (Stereo)
L
R
– ¶ 40 25 12 3 0 3 6 9 r12 dB
to select either the
repeatedly to select either
Audio Rec Level (Stereo)
L
R
–¶ 40 25 12 3 0 3 6
9 r12 dB
to exit the On Screen Display.
0
0
L
R
r 2
r 2
L
R
.
r 4
s 3
L
R