Other Timer Recordings And Convenient Functions - Panasonic NV-HS960AM Operating Instructions Manual

Other Timer Recordings and Convenient Functions

Setting the Recording Date/Day(s)
Perform this operation in operation step 3 when programming
a timer recording with the On Screen Display, or in operation
step 4 when programming with the G-code number.
(See pages 21 and 22.)
You can select the recording date (day of the month/day of
the week) by pressing the DATE button
press the i side of the DATE button
changes in the order shown below. If you press the j side of
the DATE button , the indication changes in the opposite
order.
≥ Programming a timer recording (setting the date) is
possible up to one month ahead of the TV programme's
broadcasting date and time. Daily and weekly timer
recordings will continue until you cancel them.
<To Programme within 1 Month>
Example: 1 2 ..... 31
<To Programme a Daily Timer Recording>
Example: Daily recording from Sunday to Saturday
(Su–Sa).
Daily recording from Monday to Saturday
(Mo–Sa).
Daily recording from Monday to Friday
(Mo–Fr).
<To Programme a Weekly Timer Recording>
Example: Weekly recording every Sunday
Weekly recording every Monday
Weekly recording every Saturday
(SulSunday, MolMonday, TulTuesday, WelWednesday
ThlThursday, FrlFriday, SalSaturday)
Ensuring that a TV Programme Will Be
Recorded until Its End
(Auto SP/LP Change Function)
If, at the start of a timer recording, the VCR determines that
the remaining tape time is insufficient to record the whole
programme, the Auto SP/LP Change function automatically
selects LP mode to ensure that the whole programme will be
recorded. However, if the remaining tape time is still not
sufficient even in the LP mode, the programme cannot be
recorded to its end.
≥ This function cannot change the recording speed to the
EP mode.
≥ If you programme a daily or weekly timer recording,
recording will be performed in the LP mode from the start
regardless of the remaining tape time.
≥ Use a video cassette on which a few minutes more than the
total length of programmed timer recordings remain,
otherwise the programmed timer recordings may be
performed in the LP mode.
≥ Be careful that the broadcast times of the TV programmes
set for timer recording do not overlap, otherwise the
programmed timer recordings may be performed in the LP
mode.
≥ If the recording speed changes from SP to LP during a
timer recording, some brief picture distortion occurs at that
point.
Condition for correct operation of the Auto SP/LP Change
function:
≥ The tape length of the inserted cassette must be set
correctly. (See page 44.)
To Activate the Auto SP/LP Change Function:
In operation step 6 when programming a timer recording with
the On Screen Display (see page 21), or in operation step 4
when programming with the G-code number (see page 22),
press the SP/LP button
≥ When you press this button
. If you repeatedly
, the indication
To Check the Contents of Timer Recording
Programmings
≥ Display the VCR picture on the TV.
≥ Set the VCR/TV switch
1
2
To Change a Timer Recording
Programming
It is not possible to change a programming while the timer
recording is being performed.
≥ Display the VCR picture on the TV.
≥ Set the VCR/TV switch
1
2
3
4
5
to select "A".
repeatedly, the indication changes
in the following order:
SP LP EP
A
to "VCR".
Press the PROG./CHECK button
recording programmings on the TV screen.
Press the EXIT button
the On Screen Display.
to "VCR".
Press the PROG./CHECK button
recording programmings on the TV screen.
Press the Cursor buttons (34)
programming that you want to change.
Follow the operations below to change the programmed
contents.
To change the broadcasting station:
Use the Channel buttons
To change the date of the timer
recording:
Use the DATE button
To change the recording starting
time:
Use the ON button
To change the recording ending time:
Use the OFF button
To change the recording speed:
Use the SP/LP button
Press the OK button to conclude the setting.
Press the EXIT button
Timer recording
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
ZDF 27/10 We 20 : 00 21 : 30 A OFF
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
: :
jjjjj jj/jj jj jj jj jj jj jj jjj
Indication when "A" is
selected
to display the timer
to exit
Timer recording
Pos Start Stop SP VPS
Name DATE ON OFF LP PDC
ZDF 27/10 We 20:00 21:30 SP ON
ARD 30/10 Sa 19:00 20:00 LP ON
N3 Su 21:00 23:30 SP ON
ZDF Su-Sa 17:30 18:00 EP ON
jjjjj jj/jj jj jj:jj jj:jj jj
jjjjj jj/jj jj jj:jj jj:jj jj
jjjjj jj/jj jj jj jj jj jj jj
jjjjj jj jj jj jj jj jj jj jj
to display the timer
to select the
.
Timer recording
Pos Start Stop SP
Name DATE ON OFF LP
ZDF 27/10 We 20:00 21:30 SP
ARD 30/10 Sa 19:00 20:00 LP
.
N3 Su 21:00 23:30 SP
ZDF Su-Sa 17:30 18:00 EP
jjjjj jj/jj jj jj:jj jj:jj jj
jjjjj jj/jj jj jj:jj jj:jj jj
jjjjj jj/jj jj jj:jj jj:jj jj
jjjjj jj jj jj jj jj jj jj jj
.
.
.
to exit the On Screen Display.
Min
90
jjj
jjj
jjj
Min
90
60
150
30
jjj
jjj
jjj
jjj
Min
90
60
150
30
jjj
jjj
jjj
jjj
23