Useful Information; Character Entry - Panasonic KX-TG8051FX Operating Instructions Manual

TG8051_8061FX(e-e).book Page 47 Monday, April 25, 2011 11:42 AM

Character entry

The dial keys are used to enter characters and numbers. Each dial key has multiple characters
assigned to it. The characters that can be entered depend on the character entry mode (page 47).
– Press {3} or {4} to move the cursor left or right.
– Press dial keys to enter characters and numbers.
– Press ^ to erase the character or number highlighted by the cursor. Press and hold ^ to
erase all characters or numbers.
– Press * (A→a) to switch between uppercase and lowercase.
– To enter another character located on the same dial key, press {4} to move the cursor to the
next space, then press the appropriate dial key.
– If you do not press any dial key within 5 seconds after entering a character, the character is
fixed and the cursor moves to the next space.
Character entry modes
The available character entry modes are Alphabet (ABC), Numeric (0-9), Greek (F), Extended
1 (G), Extended 2 (H), and Cyrillic (I). For SMS messages, Alphabet (ABC), Numeric (0-
9), Greek (F), and Extended 1 (G) modes are available. When in these entry modes except
Numeric, you can select which character is entered by pressing a dial key repeatedly.
When the unit displays the character entry screen:
/ s {r}: Select a character entry mode. s M
Note:
in the following tables represents a single space.
L
L The dial keys with *1, *2, and *3 in the following tables have different character assignment for
SMS. See the footnotes with *1, *2, and *3.
Alphabet character table (ABC)
Numeric entry table (0-9)
Greek character table (M)

Useful Information

47