Panasonic KX-TG8051FX Operating Instructions Manual page 29

TG8051_8061FX(e-e).book Page 29 Monday, April 25, 2011 11:42 AM
*4 If you select the unit's region setting (page 32) to
default setting will be changed for the selected country.
*5 If you select the unit's region setting (page 32) to
default setting is "On".
*6 This feature allows the unit to automatically adjust the date and time each time caller
information including date and time is received.
To turn this feature on, select "Caller ID". To turn this feature off, select "Manual". (Caller
ID subscribers only)
To use this feature, set the date and time first (page 16).
*7 KX-TG8051
*8 Ringer volume cannot be turned off for alarm, intercom calls, and paging.
*9 If you select one of the melody ringer tones, the ringer tone continues to play for several
seconds even if the caller has already hung up. You may either hear a dial tone or no one on
the line when you answer the call.
*10The preset melodies in this product are used with permission of © 2011 Copyrights Vision Inc.
*11You can set the wallpaper to display with or without date and time by pressing Z. The
default setting is with date and time displayed.
*12You can set the handset display backlight while on charge.
– "On": Backlight is on (dimmed).
– "Off": Backlight turns off after 10 seconds of charging.
*13Turn this feature off if you prefer not to hear key tones while you are dialling or pressing any
keys, including confirmation tones and error tones.
*14If you subscribe to a Caller ID service and want to view the caller's information after lifting up
the handset to answer a call, turn off this feature.
*15The recall/flash time depends on your telephone exchange or host PBX. Contact your PBX
supplier if necessary.
*16The default setting will be as follows if you select the following regional codes when changing
the unit's region setting (page 32):
*17To prevent other users from joining your conversations with outside callers, turn this feature
on.
Programming
or , the
or , the
29