Changing settings
Demo mode
Factory default
46
i
Demo mode
for showrooms only
Demo mode is for dealers who want to demonstrate the
appliance without the heater elements working. Do not
activate this setting for domestic use!
After a short while the message will go out and the Demo
mode can be switched on or off.
SETTINGS F
FACTORY DEFAULT
^ Select and confirm the setting you want.
ALL SETTINGS: Any setting that you have altered will be reset
to the factory default setting. User defined programmes will
be deleted.
USER PROGRAMMES: User defined programmes will be
deleted.
MAIN MENU: The main menu will be reset to the factory
default setting.
TEMPERATURES: Any alterations to recommended
temperatures will be reset to the factory default settings.
Back A
ALL SETTINGS
USER PROGRAMMES
MAIN MENU
H