Selecting The Handset Ringer Volume/Pattern - Panasonic KX-TCD965EC Operating Instructions Manual

KX-TCD965EC-1(2~25) 99.9.27 8:05 PM
Settings

Selecting the Handset Ringer Volume/Pattern

You can program the desired handset ringer volume and pattern.
Make sure that the power is ON (p. 14) and the unit is in the stand-by mode.
Ringer volume
7 levels are available. The lowest level is 1. The
highest level is 6. The factory preset is 3. When
set to OFF, the handset will not ring.
1
Press .
F
G F
2
Press or until the arrow points to
"Program", then press OK
G F
3
Press or until the arrow points to
"Setting Handset", then press
OKH
.
G F
4
Press or until the arrow points to
"Ringer Volume", then press OK
The current volume is displayed and rings.
G F
5
Press or to select the desired
level.
Each time you press a button, the selected
volume is displayed and rings.
R i n g e r V o l u m e
LOW
To set to OFF, erase " " by pressing
until "OFF" is displayed.
H
6
Press OK .
A confirmation tone sounds.
The display will return to "Ringer
Volume". To return to the stand-by mode,
press or wait for 60 seconds.
C
When set to OFF, "Ringer Off" will be
displayed.
16
Page 16
Ringer pattern
You can program the desired handset ringer
pattern (6 patterns). The factory preset is
pattern 1.
1
Follow steps 1 to 3 of the ringer volume
procedure.
H Press G or F until the arrow points to
2
.
"Ringer Pattern".
3
Press OK
The current ringer pattern is at the arrow
and rings.
H
.
R i n g e r P a t t e r n
H R i n g e r 1
Press G or F to select the desired
4
pattern.
Each time you press a button, the selected
ringer pattern sounds.
5
Press OK
HIGH
A confirmation tone sounds.
G
The display will return to "Ringer
Pattern". To return to the stand-by
mode, press
You can press
instead of pressing G.
You can exit the programming mode any time
by pressing
H
.
R i n g e r 2
H
.
C or wait for 60 seconds.
to go to the next menu
F
.
C