Other Options - Panasonic KX-TCD820FX Operating Instructions Manual

TCD820FX(e-e).book Page 40 Tuesday, September 13, 2005 9:10 AM
Base Unit Settings
n
Turning ARS off
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"ARS Settings" i #
5
"Carrier Code" i #
6
"Off" i # i {ih}
Setting call restriction
You can restrict selected handsets from
dialling certain numbers. You can assign up
to 6 phone numbers to be restricted, and
select which handsets will be restricted.
Storing area codes here will prevent the
restricted handsets from dialling any phone
number in that area code.
You can allow a call restricted number to be
dialled if it stored as an emergency number.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"Call Restrict" i #
5
Set which handsets will be restricted by
selecting the handset then pressing
S.
L Restricted handsets have a "Q" next
to them.
L To turn call restriction off for a handset,
select the restricted handset, then
press S.
6
#
7
Select a memory location. i #
8
Enter the phone number or area code to
be restricted (8 digits max.). i #
i {ih}
L To erase a restricted number, press
{C/T}.
40
Storing/changing emergency
numbers
If you have set the call restriction feature
(page 40) but want to allow a number to be
dialled that would normally be restricted by
call restriction, store the number as an
emergency number.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"Emergency No." i #
5
Select a memory location. i #
6
Enter/edit the number. i # i
{ih}
L To erase an emergency number, press
and hold {C/T}.

Other options

Changing the base unit PIN
(Personal Identification Number)
For security, the base unit PIN must be
entered when changing certain settings.
Important:
L If you change the PIN, please make note
of your new PIN. The unit will not reveal
the PIN to you. If you forget your PIN,
consult your nearest Panasonic service
centre.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Other Options" i #
4
"Base Unit PIN" i #
5
Enter the new 4-digit base unit PIN. i
# i {ih}