Panasonic KX-TCD820FX Operating Instructions Manual page 39

TCD820FX(e-e).book Page 39 Tuesday, September 13, 2005 9:10 AM
Setting pause length
Change the pause length, if necessary,
depending on the requirements of your
service provider or PBX.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"Pause Length" i #
5
Select the desired setting. i # i
{ih}
ARS (Automatic Route Selection)
(For Czech and Slovakia only)
Different telephone carriers charge different
rates for call to different areas. If you use
different telephone carriers in an effort to
save costs, automatic route selection can
automatically dial the appropriate carrier
code when you make calls to certain area
codes according to the way you program
this feature.
Important:
L To use automatic route selection, you
must:
– subscribe to the telephone carrier
service you use
– store the carrier codes you use
– store the area codes you want to call
using a specific carrier code
– assign a carrier code to each stored
area code
Contact your telephone carrier(s) for
calling rates.
Example: You have assigned carrier code
"9876" to area code "123".
If you dial "123-4567", the unit dials "9876-
123-4567".
Base Unit Settings
n
Storing carrier codes for ARS (Turning
ARS on)
Store the carrier codes of the telephone
carriers you use. You can store up to 5
carrier codes.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"ARS Settings" i #
5
"Carrier Code" i #
6
"On" i #
7
Select a carrier code location (C1 to C5).
i #
L If the location already contains a
carrier code, the code is displayed.
8
Enter the carrier code (7 digits max.).
i # i {ih}
Storing area codes for ARS
Store the area codes which should be
dialled using a specific carrier. You can store
up to 25 area codes.
1
" (centre of joystick) i n i #
2
Enter the base unit PIN (default:
"0000").
3
"Call Options" i #
4
"ARS Settings" i #
5
"Area Code" i #
6
Select an area code location (1 to 25).
i #
L If the location already contains an
area code, the code is displayed.
7
Enter an area code (5 digits max.). i
#
8
Select a carrier code you stored (C1 to
C5) earlier. i # i {ih}
L This carrier code will be automatically
dialled when you make a call to this
area code.
39