Other Features - Panasonic KX-TCD820FX Operating Instructions Manual

TCD820FX(e-e).book Page 17 Tuesday, September 13, 2005 9:10 AM
4
"Name" i #
5
Enter a name (16 characters max.; page
61). i #
6
"<Save>" i # i {ih}
L You can also press d to save the
entry.
L To assign a picture or category to the
entry, continue from step 7, "Adding
entries to the handset phonebook",
page 19.

Other features

Voice enhancer
You can change the tone quality of the
receiver while you are on a call.
1
Press " during a call.
2
"Voice Enhancer" i #
3
"High Tone" or "Low Tone" i #
L d is displayed.
Voice changer
When you answer an outside call, you can
lower the pitch of your voice that is heard by
the caller.
1
Press " during an outside call.
2
"Voice Changer" i #
L , is displayed.
L To turn the voice changer off, press
". i "Voice Changer" i
#
Mute
While mute is turned on, you will be able to
hear the other party, but the other party will
not be able to hear you.
To mute your voice, press {C/T}.
L To return to the conversation, press
{C/T} again.
Key lock
The handset can be locked so that no calls
or settings can be made. Incoming calls can
Making/Answering Calls
C
be answered, but all other functions are
disabled while key lock is on.
To turn key lock on, press " for about 2
seconds.
L ! is displayed.
L To turn key lock off, press ! for about 2
seconds.
R button (to use the recall feature)
{R} is used to access optional telephone
services. Contact your service provider for
details.
Note:
L If your unit is connected to a PBX (private
branch exchange), pressing {R} can allow
you to access certain features of your host
PBX such as transferring an extension
call. Consult your PBX dealer for details.
L You can change the recall time (page 38).
Pause button (for PBX/long distance
service users)
A pause is sometimes required when
making calls using a PBX or long distance
service.
Example: If you have to dial {0} before
dialling outside numbers manually, you will
probably pause after dialling {0} until you
hear a dial tone.
1
{0} i I
2
Dial the phone number. i {C} / {s}
Note:
L Pressing I 1 time creates 1 pause.
Press I repeatedly to create longer
pauses. To change pause length, see
page 39.
Temporary tone dialling (for rotary or
pulse service users)
You can temporarily switch the dialling mode
to tone when you need to access touch tone
services (e.g., telephone banking services).
1
Make a call.
17