Table of Contents
Advertisement
SETUP OPERATION
1. SET UP MENU
Make sure that the connection of cameras, peripherals, or alarm connectors is correct and firm. The SET UP MENU is not displayed
if no camera is connected. (Refer to "CONNECTIONS" on page 15.)
This menu is described in the following section 3 "SET UP MENU DESCRIPTION" in detail.
Set the DISPLAY MODE switch to ON to display SET UP MENU.
Set the INPUT SELECT switch to CAMERA to display the SET UP MENU. If you select VTR, the SET UP MENU is not displayed.
Camera
ID
ON/OFF
A set up operation can be performed with the following
switches on the front panel.
Up Switch
QUAD
SEQUENCE 1/5
2/6
Setup Switch
SET UP
Down Switch
Up Switch:
The cursor moves upwards.
Down Switch:
The cursor moves downwards.
Left Switch:
The cursor moves to the left.
The mode is selected by this switch.
Some levels can be adjusted with this
switch.
Right Switch:
The cursor moves to the right.
The mode is selected by this switch.
Some levels can be adjusted with this
switch.
Set up Switch:
The menu is selected by this switch.
2. SETUP ORDER
When camera set up is required, proceed according to the
following steps.
(1) Display the SET UP MENU by pressing QUAD/
SEQUENCE, SET UP switch more than 2 seconds.
(2) Edit CAMERA ID (Camera Identification Setting).
(3) Set AUDIO SELECT (Audio Selection).
(4) Set TIMING SELECT (Timing Selection).
(5) Set SEQ TIME ADJ (Sequential Time Adjustment).
(6) Set PAGE SEQ (Page Sequence).
(7) Set ALARM REC MODE (Alarm Recording Mode
Setting).
(8) Set ALARM TIME ADJ (Alarm Time Adjustment/ Alarm
Sound On/Off Setting).
(9) Set AUTO RESET (Auto Reset On/Off Setting).
(10) Set BRIGHT COMP (Bright Compensation Setting).
SETUP DISABLE
SETUP ENABLE
Audio
Timing
Sequence
Select
Select
Time
Adjust
Left Switch
3/7
4/8
Right Switch
SET UP menu
Alarm
Alarm
Page
Recording
Time
Sequence
Mode
Adjust
3. SET UP MENU DESCRIPTION
3-1. Camera Identification (CAMERA ID)
Up to 8 characters (alphanumeric) for camera identifi-
cation can be displayed on the top line of the picture.
Display or no display of camera ID can be set on the
first line of this item, and displayed characters can be
edited on the second line.
Note: Refer to "SET UP OPERATION" for details.
** SET UP MENU **
CAMERA ID
AUDIO SELECT
TIMING SELECT
-----
PAGE SEQ
ALARM REC MODE
ALARM TIME ADJ
AUTO RESET
BRIGHT COMP
END
3-2. Audio Selection (AUDIO SELECT)
** SET UP MENU **
CAMERA ID
AUDIO SELECT
TIMING SELECT
SEQ TIME ADJ
PAGE SEQ
ALARM REC MODE
ALARM TIME ADJ
AUTO RESET
BRIGHT COMP
END
Select the audio signal from SET UP MENU (SEQ, 1, 2,
3, or 4.)
SEQ: The audio signal changes automatically when
the camera picture changes.
1-4: The audio signal is fixed on the desired channel.
-6-
Auto
Bright
Reset
Compensation
ON/OFF
1.34..7.
1 CAMERA
1
EXT
----
2SEC
FRAME
10SEC BZ
OFF
12..5..8
SET UP ENABLE
1.34..7.
1 CAMERA..
SEQ
INT
1SEC
----
FRAME
10SEC BZ
OFF
12..5..8
SET UP ENABLE
Advertisement
Table of Contents
