LOGICOM CALIS Manual page 24

4-1 Programming the PIN code (secret personal code) for the
base
Certain functions are only accessible to users who know the base's PIN code
default PIN code is "0000").
To modify the base PIN code, follow the operation below :
• The handset is on standby (no call tone).
• Press key (7)
• "PHONE BOOK" is displayed on-screen.
• Use key (6) until "SETTINGS" is displayed
• Press key (7) .
• "BASE VOL" is displayed on-screen.
• Press key (6) until "PIN CODE" is displayed
• Press key (7) .
• " CODE " is displayed on-screen.
• Enter the old PIN code using the alphanumeric keypad
• Press key (7) .
• "NEW" is displayed on-screen.
• Enter the new PIN code using the alphanumeric keypad
• Press key (7) .
• "REPEAT" is displayed on-screen.
• Enter the new PIN code again using the alphanumeric keypad
• Press key (7) to validate the new PIN CODE.
C
• Press and hold key (9) for 2 seconds to
N.B. : During this operation, the handset automatically
been pressed for 60 seconds.
46 46
(the base's
on-screen.
on-screen.
(the default PIN code is 0000)
restore standby mode.
returns to standby when no button has
4-2 Selecting an operational base for a handset
A handset may be registered on four bases.
However, it cannot operate simultaneously on four bases, so one must be chosen as its
operational base.
If the user selects AUTO mode, the handset will operate on the first identified base (the
PIN code is not requested for this mode).
The steps below must be followed to select an operational base
• Press key (7)
• "PHONE BOOK" is displayed on-screen.
• Use key (6) until "MENU SAVED" is displayed
• Press key (7)
• "REGISTER" is displayed on-screen.
• Press key (6) to select "SEL BASE"
• Press key (7)
• Press key or (6) to select a base
(5)
•
"BASE : 1", "BASE : 2", "BASE : 3", "BASE : 4" or "AUTO"
• Press key (7) to confirm the base selected.
• "CODE" is displayed on-screen.
• Enter the PIN code for the selected base.
• "SEARCH X" is displayed on-screen while searching for the base. X represents the
selected base's number.
N.B. : During this operation, the handset automatically
been pressed for 60 seconds.
:
on-screen.
returns to standby when no button has
47