1. Manuals
  2. Brands
  3. LOGICOM Manuals
  4. Cordless Telephone
  5. CALIS
  6. Manual

LOGICOM CALIS Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Enlarged version
DECLARATION OF CONFORMITY
We, the undersigned,
Logicom
74, rue de la Belle Etoile
Z.I. Paris Nord II
B.P. 58338
95941 ROISSY CDG
FRANCE
hereby declare that the CALIS product complies with the essential requirements applicable, par-
ticularly the following requirements drawn from directive 1999/5/CE :
Article 3.1a - (protection of the health and safety of the user):
-EN60950 (2000) Article 3.1b - (protection requirements for electromagnetic compatibility):
-EN301489-01 V1.3.1, EN301489-06 V1.1.1 Article 3.2 - (effective use of the radio spec-
trum so as to avoid harmful interference):
-EN301406 V1.4.1
The product has an average power of less than 20 mW, so the SAR test is unnecessary for pro-
ducts with a power less than or equal to 20 mW.
We declare that the CALIS product complies with the requirements related to European stan-
dards for line interfaces
This device is intended to be sold in France.
This conformity is understood to apply as long as the product for which it granted is installed
and used according to the instructions provided in the user manual.
Any unauthorised modification to the production cancels this declaration of conformity.
Roissy, 17 August 2004
Bernard BESSIS
Chief Executive Officer
1

Advertisement

Table of Contents
loading

Related Manuals for LOGICOM CALIS

Summary of Contents for LOGICOM CALIS

  • Page 1 The product has an average power of less than 20 mW, so the SAR test is unnecessary for pro- ducts with a power less than or equal to 20 mW. We declare that the CALIS product complies with the requirements related to European stan- dards for line interfaces This device is intended to be sold in France.

  • Page 2: Table Of Contents

    Finally, CALIS is compact and simple to use, taking up little space on your desk. Please read through this manual fully to get the best use out of the phone.

  • Page 3: Telephone Functions

    • Backlit screen. Available only on the CALIS 200, 202, 203, and 204 models. • Call duration timer. • Hands free mode. Available only on the CALIS 200, 202, 203, and 204 models. • Combined call. • 2 handsets can be programmed on the same base.

  • Page 4: Precautions For Use

    Precautions for use: 1-3 Safety conditions : • The appliance must not be connected to an IT power circuit. • Read the instructions carefully. • The phone is powered by an AC/DC mains adaptor compliant with standard EN • Only use the mains adaptor supplied. 60950, and connected to a 230 VAC 50 Hz socket.

  • Page 5: Battery Charge Level

    2 - TELEPHONE FUNCTIONS Battery charge level Diagrams and functions pages 10 and 11 battery is full. Switching the handset on/off page 12 Using the menu page 12 The battery is at 50% of its maximum charge. Choosing a language page 13 Dialling a number page 14...

  • Page 6: Diagrams And Functions

    104. Lets you consult the phone book. 13- Indicator light Shows the charge of the handset batteries. for the CALIS 200, 202, 203, and 204. Enables or disables the hands free mode. 14- Indicator light Shows when a line is taken (on).

  • Page 7: Using The Menu

    2-2 Switching the handset on/off 2-4 Choosing a language a) Switching the handset There are 5 languages programmed into the menu: French, English, German • The handset is on (DEUTSCH), Italian (ITALIANO) and Spanish (ESPANOL). The default language programmed is FRENCH. •...

  • Page 8: Receiving A Call

    2-6 Receiving a call 2-5 Dialling a number a) The handset is not on its base. • The handset rings (according to settings). Standard dialling procedure • The icon flashes on the LCD screen • The handset is on standby (no call tone). •...

  • Page 9: Hands Free Mode

    2-7 Hands free mode 2-8 Adjusting the listening and hands free volume Without picking up the handset, this function enables you to : Setting the listening volume in the earphone is identical to setting the • Hear the call tone. hands free volume.

  • Page 10: Using The Alphanumeric Keypad

    2-10 Personalising the handset 2-9 Using the alphanumeric keypad This function allows you to give your handset a name. The handset’s name must not be Some functions such as the phone book or the handset name require the alphanumeric keypad to be used. The keypad automatically goes into alphanumeric mode when you more than 5 characters.

  • Page 11: Recording A Number And A Name In The Phone Book

    Direct access to the phone book using the alphanumeric keypad. Press key on the CALIS 100, 102, 103, 104 to consult the phone book. • Press key Press key on the CALIS 200, 202, 203, 204 to consult the phone book.

  • Page 12: Dialling A Number From The Phone Book

    2-13 Dialling a number from the phone book • Use key remove the displayed number character by character. • Press key to consult the phone book. • Enter the new phone number corresponding to the name you have already recorded by using the alphanumeric keypad.

  • Page 13: Displaying The Call Duration

    • The set ring tone sounds and is displayed (“MELODY: 3” for example). 2-16 Displaying the call duration • Press key or (6) to select a ring tone. The call duration is displayed after 15 seconds. • Press key to validate the setting. In minutes-seconds: “00-15”.

  • Page 14: Selecting A Ring Tone For The Base

    2-19 Selecting a ring tone for the base 2-20 Setting the ring tone volume on the base Five different ring tones are available for this system. The volume of the ring tone may be set at five levels (1 is the minimum and 5 the maxi- mum).

  • Page 15: Setting The Date And Time

    2-21 Interphone Function 2-23 Setting the date and time. This function is only accessible when two handsets are saved on the same base. CAUTION : If the user has subscribed to France Telecom’s name or number identification, the date and time is automatically adjusted by the network at each incoming call. The user can call the other handset using this function.
  • Page 16 ON : light activated OFF : light deactivated • Press key current setting is displayed (ON or OFF) • Press to validate the setting. • Press key or (6) to enable or disable the key sounds. • Press and hold key for 2 seconds to restore standby mode.

  • Page 17: Locking/Unlocking The Keypad

    2-27 Locking/Unlocking the keypad Modifying the R key’s waiting time : Five waiting times are available : Locking the keypad avoids dialling a number accidentally. - Position 1 corresponds to a waiting time of 80 ms. - Position 2 corresponds to a waiting time of 100 ms. To lock the keypad : - Position 3 corresponds to a waiting time of 180 ms.

  • Page 18: Resetting Default Settings

    2-30 Pause Function • Press key or (6) to select the desired pause duration. • Press to validate the setting. When the user dials a number he/she may insert a pause by holding down key for 3 seconds (after dialling at least one figure) then finish dialling the number. •...
  • Page 19 To restore the default settings, follow the operations below : 3 CALLER NUMBER OR NAME IDENTIFICATION • The handset is on standby (no call tone). • Press key Access to the name or number identification service is subject to subscription with France Telecom (freefone 1014 or 3614 France Telecom on your minitel) and to France Telecom’s •...

  • Page 20: Call Identification

    The telephone saves a list of the last 24 incoming calls. This list is the “call log”. • On receiving a call, the incoming line’s number is compared to the numbers saved in LOGICOM the directory. If the number is identified in the directory the telephone replaces the incoming number with the name sourced in the directory.
  • Page 21 As the caller withholds the number, one cannot return the call. Caller’s name LOGICOM c) The caller’s number is unavailable LOGICOM tried to reach you once. • To display the number followed by the date and time associated with a name, INDISPON use key An error has occurred on the network, number or name display is unavailable.

  • Page 22: Phone Book

    • The name in the log is displayed automatically COMMENTS : • Press the key to dial the number of the caller whose name of telephone number is displayed • Use the alphanumeric keypad to modify the name displayed (key deletes a on-screen.

  • Page 23: Advanced Options

    4 ADVANCED OPTIONS Programming the PIN code (secret personal code) for the base page 44 Selecting an operational base for a handset page 45 Registering a handset onto a base page 46 Cancellation of a handset on a base page 48...
  • Page 24 Programming the PIN code (secret personal code) for the 4-2 Selecting an operational base for a handset base A handset may be registered on four bases. Certain functions are only accessible to users who know the base’s PIN code (the base’s However, it cannot operate simultaneously on four bases, so one must be chosen as its default PIN code is...
  • Page 25 4-3 Registering a handset onto a base To register a new handset, follow these steps : The user must know the PIN code for this function. • “NOT REGD” flashes on-screen. • Press and hold the key on the base until flashes (approximately 10 seconds).
  • Page 26 4-4 Cancelling a handset on a base 5 RESETTING THE APPLIANCE The user must know the PIN code for this function. This function is used to reset the original configuration of the telephone as used initially. A handset may be deleted from a base.
  • Page 27 Parliament and the Commission concerning the pan-European connection of unique terminals to public switched telephone networks (PSTN). The LOGICOM supplier warranty is valid for normal use of the device as defined in the However, as there are differences between each country’s PSTN, compliancy does not consti- instructions for use.
  • Page 28 THE EVENT OF A PROBLEM AND FOR FURTHER INFORMATION PLEASE CONTACT OUR CUSTOMER CARE SERVICE Tel.: +33 (0)1 48 63 67 94 +33 (0)1 48 63 67 95...

Table of Contents