Resetting Default Settings; Pause Function - LOGICOM CALIS Manual

2-30 Pause Function

When the user dials a number he/she may
for 3 seconds (after dialling at least one figure) then finish dialling the number.
This automatically inserts a pause in the number dialled. The PAUSE function may be sto-
red in the same manner as an ordinary number in the directory's 25 memories.
NB : Key (5) will not run the PAUSE function if no figure has been dialled before
/P
triggering it.
Modifying the duration of the pause :
CAUTION : The pause's default setting is a duration of 3 seconds (position 4) as this is how it
works in France. However, modifying this time may prove essential for informed users.
Four pause times are available :
- Position 1 corresponds to 1 second.
- Position 2 corresponds to 1.5 seconds.
- Position 3 corresponds to 2 seconds.
- Position 4 corresponds to 3 seconds.
To modify the pause duration, follow the operation below :
• The handset is on standby (no call tone).
• Press key
(7)
• "PHONE BOOK" is displayed on-screen.
• Use key (6) to select "SETTING"
• Press key .
(7)
• "BASE VOL" is displayed on-screen.
• Press key (6) until "PAUSE" is displayed
• Press key .
(7)
• The pause duration used is displayed ("PAUSE:
34 34
insert a pause by holding down key (5)
on-screen.
4" for position 4, for example).
• Press key (5) or (6)
• Press (7) to validate the setting.
/P
• Press and hold key
NB : During this operation, the handset automatically
pressed for 60 seconds.

2-31 Resetting default settings

The user must know the
This function is used to restore all the default settings of the telephone.
The following default settings will be obtained :
Call Log : Clear
Entries redial : Clear
Phone Book : Clear
Time : 12:00
Date : 01-01
Listening volume : 4
Internal handset ring tone : 1
External handset ring tone : 3
Volume of handset ring tone : 4
Volume of base ring tone : 4
Base ring tone : 3
R Key : 4 (300 ms.)
Pause function : 4 (3 seconds.)
Language : French
Beep key : On
Low battery alarm : On
Handset out-of-range alarm : ON
Automatic response : On
Handset name : DECT
to select the desired pause duration.
C
for 2 seconds to restore standby mode.
(9)
returns to standby when no button has been
base's PIN code for this function.
35