Sharp MX-M350U Operation Manual page 168

SAVING A DOCUMENT IMAGE FILE
■ Using special functions for scan save
Touch the [SPECIAL MODES] key in the main scan save screen to display the special modes screen.
The functions below can be selected in this screen.
(1) [ERASE] key (see page 5-4)
Use this function to erase shadows that can appear
around the edges of the image when books and
other thick originals are scanned.
(2) [DUAL PAGE SCAN] key (see page 5-5)
(Equivalent to Dual page copy in copy mode)
This function is used to save the opened pages of
a book in order one page at a time (left page then
right page).
(3) [2in1] key (see page 5-24)
(When the fax or image send function is installed,
this corresponds to the 2in1 function explained in
the fax and network scanner manuals. This also
corresponds to the "Multi shot" function in copy
mode; however, only 2in1 is possible for scan
save.)
This function reduces two original pages and
arranges the images on a single page in a uniform
layout.
7-12
READY TO SCAN TO HDD.
PRESS [START] TO SCAN ORIGINAL.
SCAN TO HDD
AUTO
EXPOSURE
300x300dpi
RESOLUTION
AUTO
ORIGINAL
(1)
[READY TO SCAN TO HDD.
PRESS [START] TO SCAN ORIGINAL.
SPECIAL MODES
ERASE
JOB
BUILD
(4)
Touch the [SPECIAL MODES]
key in the main screen.
BACK
SPECIAL MODES
FILE
INFORMATION
(2) (3)
OK
DUAL PAGE
2in1
1 2
SCAN
CARD SHOT
(5)
(4) [JOB BUILD] key (see page 5-8)
When you have more pages than can be placed in
the document feeder at once, this function allows
you to scan the pages in sets.
(5) [CARD SHOT] key (see page 5-27)
This function allows you to save the front and back
side of a card on a single page (instead of saving
each side as a separate file).