Sharp MX-M350U Operation Manual page 97

■ Copy output (sort and group)
Example: Making five sets or five copies each of three originals
● Sorting copies into sets
Original
LOGOUT
Touch the
Set the
[OUTPUT] key
number of
copies (5)
When using the automatic document feeder, sorting is
automatically selected when the original is placed in the
document feeder.
● Grouping copies by page
Original
LOGOUT
Touch the
Set the
[OUTPUT] key
number of
copies (5)
"Group" is automatically selected when the
original is placed on the document glass.
■ Selecting the output tray (when an optional finisher or saddle stitch finisher is
installed)
When the [OFFSET TRAY] key is highlighted, output pages are delivered to the offset tray of the finisher or
saddle stitch finisher. When the "CENTRE TRAY" key is highlighted, output pages are delivered to the centre
tray. Touch the appropriate key to select the desired output tray.
OUTPUT
OFFSET
TRAY
SORT
STAPLE
SORT
GROUP
OFFSET
This screen appears when a saddle stitch finisher is installed.
The screen that appears when a finisher is installed is slightly different.
OUTPUT
SORT
SPECIAL MODES
2-SIDED COPY
OUTPUT
GROUP
Touch the
[SORT] key
OUTPUT
SORT
SPECIAL MODES
2-SIDED COPY
OUTPUT
GROUP
Touch
[GROUP] key
0
OK
CENTER
TRAY
SADDLE
STITCH PUNCH
Press the [START]
key
Press the [START]
the
key
NORMAL COPYING
Five sets of copies
5 copies per page
4-9
4