Sharp MX-M350U Operation Manual page 136

SPECIAL MODES
Touch the outer [OK] key.
4
OK
CANCEL OK
SIZE RESET
FIT TO
PAGE
5 Place the original on the document glass.
6 Follow steps 4 through 6 of "Copying from
the document glass" (page 4-12).
7 Press the [START] key.
5-28
You will return to the
main screen of copy
mode.
Place the front side of
the original face down
and close the
document cover.
The front side of the
card is scanned.
Place the back side of the original face
8
down on the document glass (see step 5).
Press the [START] key.
9
10 Touch the [READ-END] key.
NOTE
The original must be placed on the document glass.
The document feeder (automatic document feeder)
cannot be used.
To cancel the card shot function, touch the
[CANCEL] key in the card shot setting screen (the
screen of step 4).
The back side of the
card is scanned.