Audio Dubbing - Panasonic NV-GS320 Operating Instructions Manual

ª
To cancel the standby for recording
When the camera is standby for recording, move
the joystick down and select the [∫] icon or press
the [∫] button on the remote control.
≥Do not plug or unplug the DV cable during
dubbing, or the dubbing may not be completed
properly.
≥If a picture (bilingual video, etc.) containing main
sound and sub sound has been dubbed, select
the desired sound by [SETUP] >> [AUDIO OUT]
on playback.
≥Even if you use a device equipped with DV
terminals such as IEEE1394, you may not be
able to perform digital dubbing in some cases.
For more information, see the instructions for
equipment connected.
≥Regardless of the menu settings on the
recorder, digital dubbing is carried out in the
same mode as the [AUDIO REC] mode of the
playback tape.
≥The images on the recorder monitor may be
disturbed, but it does not affect the recorded
images.
≥If a picture containing a copyright protection
signal (copy guard) is recorded by the movie
camera, the picture is distorted by mosaic-like
patterns at playback.
≥Disconnect the USB cable since input signals
from the external input terminal cannot be
recorded while it is connected with the USB
cable.
≥While pictures are input from the DV terminal,
the operation icon blinks on instead of
appearing from the side of the screen when you
press the centre of the joy stick.
≥While pictures are input from the DV terminal,
the TV aspect will not change even if you
change the setting for [TV ASPECT] in the
[SETUP] menu.
Edit mode

Audio dubbing

You can add music or narration to the recorded
cassette.
(Audio dubbing can only be performed by
using the remote control.)
≥Set to Tape Playback Mode.
1
Find a scene that you want to add sound to,
and press the [;] button on the remote
control.
2
Press the [AUDIO DUB] button on the
remote control to make audio dubbing
ready.
3
Press the [;] button on the remote control
to start audio dubbing.
≥Be sure that the sound is directed towards the
built-in microphone.
4
Press the [;] button on the remote control
to stop audio dubbing.
≥If a tape has a non-recorded portion when the
tape is dubbed, images and sounds may be
disturbed when this portion of the tape is played
back.
;
A.DUB ;
A.DUB ¥
121
VQT1A48