Tele Macro Function; Fade In/Fade Out Function - Panasonic NV-GS320 Operating Instructions Manual

Tele macro function

By focusing only on the subject and blurring the
background, the image can be impressive. This
camera can focus on the subject at a distance of
approx. 50 cm.
≥Set to Tape/Card Recording Mode.
1
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
2
Move the joystick right to select the tele
macro icon [ ].
≥The [TELE MACRO ON] indication appears
on the screen of the movie camera.
≥If the magnification is 10k or less, then it is
automatically set to 10k.
ª
To cancel the tele macro function
Select the [ ] icon again.
≥The [TELE MACRO OFF] indication appears on
the screen of the movie camera.
≥If a sharper focus cannot be achieved, adjust
the focus manually.
≥In the following cases, the tele macro function is
cancelled.
≥The zoom magnification becomes lower than
10k.
≥The power is off or the mode dial is operated.
106
VQT1A48
Record mode

Fade in/fade out function

Fade in
The image and audio gradually appear.
Fade out
The image and audio gradually disappear.
≥Set to Tape Recording Mode.
1
2
1
3
Start recording. (fade in)
When you start recording, the image/audio
disappeared completely and the image/audio
gradually appears.
Pause recording. (fade out)
The image/audio gradually disappears. After the
image/audio completely disappears, recording
stops.
Press the joystick to display the icon. Move
the joystick down until icon 1 appears.
Move the joystick left to select the fade icon
[ ].
B
≥The [FADE ON] indication appears on the
screen of the movie camera.
Press the recording start/stop button.
1