PF8d and PF8t Desktop Printer User's Guide
4 In the Connect using drop-down menu, make sure that COM1 is
selected.
5 Click OK. The COM1 Properties window appears.
6 Select these port settings:
Bits per second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow control: None
7 Click OK.
8 Select File > Properties > the Settings tab.
9 Click ASCII Setup. The ASCII Setup window appears.
10 Select these check boxes:
•
Send line ends with line feed
•
Echo typed characters locally
•
Append line feeds to incoming line ends
11 Click OK to save and exit ASCII Setup.
12 Click OK.
13 Test your connection by typing UQ in the main window.
Information about your printer appears in the window.
To send commands
•
Type a command in the terminal window, and press Enter. For a
list of commands, see the
Printer Programmer's Reference
Chapter 2 — Connecting the Printer
ESim for the PC4, PF8, PD41, and PD42
Manual.
39