Table of Contents
Advertisement
Auto Setup (For TV and/or VCR without Q Link Functions)
START
1
AV LINK
DIRECT TV REC TV ASPECT
TV / TEXT
Í
TRACKING/V-LOCK
1
2
3
1
+
–
4
5
6
VOLUME
4
7
8
9
+
INPUT SELECT
–
0
AV
SV/V +
LIBRARY/SEARCH
INDEX
STILL ALBUM REPLAY
REC
1,3,10
MENU
EXIT
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5,8
2
6,7
OK
5
4
VCR
1
TV
4,7
r
r
r
DATE
ON
OFF
s
s
s
CANCEL
SP/LP/EP
PROG. / CHECK
TIMER
Á
AUDIO OSD/DISPLAY RESET
I-TIMER
VCR
1
2
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
6
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
7
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
8
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
9
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
FINISH
10
Set the [VCR/TV] switch to [VCR]. Turn on the TV, then
VCR
TV
press the [VCR-ON/OFF] button to switch the VCR on.
r
The VCR will now start Auto Setup.
• If Auto Setup has previously been completed this
Í
indication will not appear. In this case you can re-start
Auto Setup again. See page 34.
• In some cases, where the VCR has been connected to
your TV using the RF lead only (no Scart) the RF
output channel may interfere with the TV stations
transmitted in your area. This may prevent you from
seeing the On Screen Display clearly.
Please refer to page 10 for removing the interference
before restarting Auto Setup (page 34).
• If you want to cancel Auto Setup before it has finished,
EXIT
press the [EXIT] button. You can restart Auto Setup
again, see page 34.
• The first digit of the VCR display will begin to flash.
After a while, it will stop flashing and the RF output
channel number will be displayed.
• If you have connected the VCR to the TV with a Scart
lead, you will see the screen on the right during Auto
Setup. You can skip step 2 below.
Select an unused channel pre-set on your TV and tune
it to the RF output channel number shown on the VCR
display (or until you can clearly see the Auto Setup
screen shown on the right). Store the new video
playback channel (refer to the instructions for your TV).
• If you can see interference on the picture, you may
need to change the RF output channel. Follow the
instructions on the next page to do this.
Press the [EXIT] button. The Owner ID screen will
EXIT
appear.
You can complete the Owner ID now or skip this step
and do it later. To do it later, press the [EXIT] button
again. Your VCR is now ready to use.
To set the Owner ID now, press the [Numeric] buttons
1
2
3
4
5
6
or [Cursor] buttons (34) to enter a four-digit PIN
7
8
9
number. If you make a mistake then press the [Cursor]
0
button (2) and the re-enter the correct digit. Make sure
that you will remember the PIN number (make a note of
it).
Press the [OK] button and the [Cursor] button (4).
OK
The cursor moves to [Name].
Press the [Cursor] button (1).
Press the [Cursor] buttons (34) to select a letter and
then press the [Cursor] button (1) to move to the next
letter.
Repeat these steps until you have entered your name.
Press the [OK] button to finish setting your name.
OK
Enter the [House No] and [Postcode] in the same way.
When you are happy with the information that you have
EXIT
entered, press the [EXIT] button to leave the Owner ID
screen. You will now see the TV picture.
Your VCR is now ready to use.
VCR Display
V
On Screen Display
Panasonic VCR
Auto-Setup
Tuning
: Ch 21
Panasonic VCR
Auto-Setup
Auto setup is now complete
(Output channel is 28)
Panasonic VCR
Owner ID
PIN number :846¢
Name
:¢¢¢¢¢¢¢¢¢¢¢¢¢¢
House No
:¢¢¢¢¢¢¢¢¢¢¢
Postcode
:¢¢¢¢¢¢¢¢¢¢¢
BBC1
9
Hide quick links:
Advertisement
Table of Contents
