Removing Interference - Panasonic NV-FJ730B Operating Instructions Manual

If the clock setting menu appears after Auto Setup has finished (Auto clock set was not possible due to weak signal)
STILL ALBUM REPLAY REC
2
MENU
EXIT
1
OK
VCR
TV

Removing Interference

In some cases, interference (lines or patterning) or a very poor picture may appear on the TV when the VCR is
connected. If this happens, follow the steps below to change the video playback channel (RF output channel) to remove
the interference.
TV screen
The picture with interference
AV LINK
DIRECT TV REC TV ASPECT TV / TEXT
Í
TRACKING/V-LOCK 3
1 2 3
+
3
–
4 6
5
VOLUME
+
7 8 9
INPUT SELECT
2
0 –
AV
SV/V +
LIBRARY/SEARCH INDEX
STILL ALBUM REPLAY REC
MENU
EXIT
5
OK
VCR 1
TV
r r r
DATE ON OFF
The clear picture
10
1 Press the [Cursor] buttons (3421) to set the correct
time and date.
OK
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2 Press the [OK] button to finish this setting.
OK
VCR
TV
1 Set the [VCR/TV] switch to [VCR].
r
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
2 Press the [MENU] button for more than 5 seconds.
MENU
The RF output channel number is displayed on the
VCR display.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
3 Press the [Numeric] buttons or use the [Channel]
button to select a channel number, which differs by 2
1 2 3
4 5 6
or 3 from the present channel number.
7 8 9
(For example, if the original channel number was 28,
0
enter 31.)
• Set the RF output channel of the VCR to [ss] (RF
OFF) when the VCR is connected to the TV via the
21-pin Scart cable.
Press the [Numeric (0)] button or [Channel] button to
display [ss]. Skip the step 4, if using a 21-pin Scart
cable.
21
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
4 Retune your TV until you receive the Test pattern.
It may be necessary to repeat steps 2 and 3 above
until you can see the Test pattern clearly.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
5 Press the [OK] button to finish this setting.
OK
...
68
(RF OFF)
On Screen Display
Panasonic VCR
Clock setting
Clock setting : MAN.
Time : 0:00:00
Date : 1.11.01
On Screen Display
VCR
Ch:28
Test pattern indication
VCR display
Indication when the RF output
channel is 28 (example)
Indication after changing the RF
output channel to 31 (example)
VCR
Ch:31
Test pattern indication