One Time Vcr Setup (On-Screen Language, Channel Memory, Auto Clock Set) - Panasonic OmnivisionVHS PV-7452 Operating Instructions Manual

One Time VCR Setup (continued)
SELECT/SET
(AV 4b)
keys
MENU
STOP
ADD/DELETE
keys
CHANNEL UP
To Change On Screen Display Language
1 Push MENU to display the menu.
SET UP VCR
2 Push AY to select
the language.
English: LANGUAGE
Spanish: IDIOMA
French: LANGUE
T CLOCK
SET UP CHANNEL
'ENGLISH
3 Push P repeatedly to change the language.
SET UP VCR
SET CLOCK PREPARAR VCR
SET UP CHANNEL | PREDA RELOJ
1D |OMA/ LANGUES,
ran c
REGLAGE Heater
-----»--« MEN = - ee eee ew
¿E REGLAG
REGLAGE C
ELEGIR:A Y LANGUAGE? IDIOMA FRANÇAIS
FIJAR :»
$ SEL. :A"
TERMINAR : MENU REGLER | P
FIN : MENU
4 Push MENU to exit this mode.
To Add or Delete a Channel
NUMBERED keys to add
or CH A/Y to delete.
2 Push ADD/DLT to add or
delete the channel.
* To select a channe! once it's
deleted, use the NUMBERED
keys on the remote control.
Deleted channels will flash in the Multi
Function Display on the VCR when selected.
VN
E
NS
14
CHANNEL 08 DELETED
To Replace Channels in Memory
In case you have cable installed, etc.
1 Push MENU to display the menu.
2 Push AY to select "SET UP
CHANNEL," and then push
b to display the "SET UP
CHANNEL" screen.
3 Push AY to select
"ANTENNA SYSTEM," and
l
then push P to set your
EU
antenna system (TV or CATV).| VR Kass rTu"
4 Push AV to select "AUTO BET > KEY
SET" and then push P to Eo he kev
display the "CHANNEL/CLOCK
AUTO SET" screen.
* If you use a cable box, turn it on and set it to
the PBS channel in your time zone.
* To exit this mode, push MENU twice.
5 Push CH A to start CHANNEL/ CLOCK AUTO SET
Channel Auto Set. CONNECT ANTENNA CABLE
* Clock Auto Set will be ANO IF YOU USE
performed when channels
are replaced in memory.
To cancel, push STOP
when "AUTO CLOCK SET
PROCEEDING' appears on-screen.
SET UP VCR
CLOCK
tDIOMA/ LANGUE: ENGLISH
-- SET UP CHANNEL ---
PLEASE PUSH CH UP KEY
To Set or Reset the Clock
In case the clock is wrong, or a power failure occurred.
1 Push MENU to display the
menu.
2 Push AV to select "SET
CLOCK," and then push »
to display the "SET CLOCK"
screen.
CODES
3 Push AV to select "MANUAL
SET," and then push P to
display the SET CLOCK screen.
SELECT:A Y KEY
1» KEY
:MENU KEY
4 Push AV and 4P to select
and set the date, time, and
D.S.T. (Daylight Saving Time). |;
SELECT:4 Y KEY
5 Push MENU twice to start the i4 P KEY
clock and exit this mode.
* For Auto Clock Set, select "AUTO SET"
and then push CH À in step 3.
When Using the 100 key
When selecting CATV channels 100 to 125 with the
NUMBERED keys, first push the 100 key and then
enter the remaining two digits.
For example, to select channel 125:
Push NUMBERED keys 100, then 2, then 5.
* This VCR will accurately maintain its calendar up to Dec. 31, 2015, 11:59PM.
* Normal TV or Cable channels are automatically selected and placed in memory depending on how your VCR is hooked up.