Initial Setup For Dss/Cable Box-Vcr-Tv Connection - Panasonic OmniVision PV-V4611 Operating Instructions Manual

Initial Setup for DSS/Cable Box-VCR-TV Connection
How to Connect
Connect the OUT Jack on your cable box to the IN FROM
ANT. terminal on the VCR with an RF cable.
D Connect the OUT TO TV terminal on the rear of VCR to the ANT.
IN terminal on TV using the RF Cable (included accessory).
VCR IN FROM ANT. Cable TV
AA Converter Box
| a
IN from
4
ANT/CABLE
S OUT TO TV D
How to do Initial Setup
1 Press VCR* for VCR mode. Turn
the TV on and set it to channel 3.
or
3 Press CHA to select English.
Press CHY to select Spanish.
Turn VCR on. or
When VCR is turned on the first Press VCR/TV key to select French.
time, SELECT LANGUAGE screen When one of above keys is pressed,
appears.
SELECT CONNECTION
screen is
Ea INGUAGE displayed in the selected language.
A
P
ESS CH 4: ENGLISH
AIMIR CH Y : ESPAÑOL
Pp a
[ VER [CLOCK [CHANNEL
SELECT CONNECTION
VCR Tv
CABLE/DSS BOX*vCH»TV
. VCAITV : FRANCAIS
VCRPCABLE/DSS BOXPITV
SELECT:A Y SET:»
EXIT :ACTION
TO CHANGE VCR' S OUTPUT
CH, PRESS ACTION KEY.
If screen does not appear, check
connection between VCR and TV
and, if TV is tuned to channel 3, try Press A Y to select "CABLE/DSS
switching it to channel 4. BOXPVCRPTV" connection and
* When you want to change the output press » to set.
channel of VCR, please refer to VCR's
Output Channel on page 13. =
* If wrong language is set, do "Reset All B
VCR Memory Functions" steps on ÓN
page 9. CABLE/DSS BOX OUTPUT €
WARNING SELECT:A Y SET:»
EXIT __ -ACTION i
When using "Nut type" RF coaxial cables, tighten with fingers
only. Overtightening may damage terminals.
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com