Suggested Tool Requirements - Panasonic CW-XC184HU Service Manual

3.4 SUGGESTED TOOL REQUIREMENTS

SCREWDRIVER(+, -), RULER, KNIFE, HAMMER, PENCIL, LEVEL
3.5.1 PREPARATION OF CHASSIS
1. Remove the screws which fasten the cabinet at both sides
and at the back. Keep these two screws which fasten the
cabinet at both sides for later use.
2. Slide the unit out from the cabinet by gripping the base pan
handle and pulling forward while bracing the cabinet.
3. Cut the window sash seal to the proper length. Peel off the
backing and attach the Foam-PE to the underside of the
window sash.
4. Remove the backing from Foam-PE with 3 holes and attach
it to the bottom of the Top retainer bar.
5. Attach the Top retainer bar onto the top of the cabinet with 3
screws (Type A).
6. Fasten the curtains to the unit with 10 screws (Type A) at
both sides.
Figure 18
Figure 19
Foam-PE
Figure 20
Top retainer bar
Screw
(Type A)
Figure 21
—15—
Shipping screws
Top retainer bar
Foam-PE
Screw(Type A)