Camera Control Functions - Panasonic WJ-FS616 Operating Instruction

6. To display another playback picture, press the
FUNCTION button.
The LED on the button starts to blink. Select the
channel you want to display by pressing the corre-
sponding CAMERA button.
7. To return to the camera picture multiscreen, press
the MULTISCREEN SELECT button.
To display the playback picture in Single Spot
mode,press the VTR/CAM button.
Note: To return to the previous camera picture mul-
tiscreen, press the FUNCTION button while the
LED in the button is blinking.
2. Multi Still
Repeat the above procedure. Then proceed as
described in "Displaying the Camera Picture, 5.
Multi Still" on page 39.
Note: You cannot still the displayed playback pic-
ture on the monitor screen.
CAMERA CONTROL
FUNCTION
The camera control is only available while the cam-
era picture is displayed in Single Spot on the select-
ed monitor screen and the LOCK switch is in OFF
position.
Camera Selection
1. Press the SPOT or MULTISCREEN SELECT but-
ton. The LED (green) on the button lights up.
2. Press the VTR/CAM button to CAM position (LED
off).
3. Press a CAMERA (1 - 16) button to display a
selected camera picture in Single Spot on the mon-
itor screen.
The LED on the selected CAMERA button lights up.
Controlling System
Accessories
1. Lens Control
1. Select the desired camera referring to the Camera
Selection procedure described above.
2. Press the FOCUS button and adjust the lens focus
to obtain a sharply focused picture while observing
the monitor.
If the specified camera with auto focus feature is
used, press both of these buttons simultaneously to
adjust the lens focus automatically.
3. Press the ZOOM button and adjust the lens zoom
to obtain the desired picture while observing the
monitor.
-42-
MULTI
SPOT SCREEN
VTR
CAM
FOCUS
NEAR FAR
ZOOM
TELE WIDE