Camera Control Function; Camera Selection; Controlling Camera Site Accessories - Panasonic WJ-FS616C Operating Instructions Manual

CAMERA CONTROL FUNCTION

The camera control is only available while the camera
image is displayed in single spot on the selected monitor
screen and the LOCK switch is in OFF position.

Camera Selection

1. Select an either spot or multiscreen monitor by pressing
the [SPOT] or [MULTISCREEN] button.
The indicator in the selected button is on.
SPOT
2. Select the live camera mode (indicator off) by pressing
the [VCR/CAM] button.
3. Select a camera image you want control by pressing a
[1 – 16] button
The indicator in the selected button lights and the cam-
era image corresponding to the button appears on the
monitor screen.

Controlling Camera Site Accessories

For controlling camera site accessories, normally combina-
tion camera equipped with the specific feature or a speci-
fied receiver are required to utilize these functions.
Lens Control
Confirm that the specified lens with power zoom/focus func-
tions is mounted on the camera.
1. Select the desired monitor and camera referring to the
Camera Selection procedure described above.
2. Press the [FOCUS NEAR/FAR] button to adjust the lens
focus to achieve a sharply focused image while observ-
ing the active monitor.
56
MULTI
SCREEN
VCR
CAM
FOCUS
NEAR FAR
Pressing both of these buttons simultaneously will auto-
matically set the lens focus, if the specified camera with
auto focus feature is used.
3. Press the [ZOOM] button to adjust the lens zoom to
achieve the desired image while observing the active
monitor.
Press the [TELE] button to optically bring an object
closer.
Pressing the [WIDE] button has the reverse effect.
ZOOM
TELE
4. Press the [IRIS CLOSE/OPEN] buttons to close/open
the lens iris. Adjust the lens iris by pressing these but-
tons to obtain the proper image exposure.
I R I S
CLOSE
Pressing these buttons at the same time will reset the
lens iris to the factory default setting.
Pan/Tilt Control (Manual Operation)
1. Select the desired monitor and camera referring to the
Camera Selection procedure described above.
2. Press the Direction buttons to move the pan/tilt head in
the desired direction.
Pressing the D and B buttons will move the pan/tilt
head upwards and to the right.
UP
LEFT HOME/SET
DOWN
Note: To move the pan/tilt head faster, press the
[HOME/SET] button
Direction buttons.
WIDE
OPEN
RIGHT
while holding down the