Operating Procedures; Monitoring The Camera Picture - Panasonic WJ-FS109 Operating Instructions Manual

OPERATING PROCEDURES

Monitoring the Camera Picture

1. Spot Picture
1. Confirm that the LED on the VTR/CAM button is not lit.
If the LED is lit, press the VTR/CAM button so that the
VTR/CAM indicator goes off.
2. Press a CAMERA SELECT button to display a camera
picture on the monitor screen.
The LED on the pressed CAMERA SELECT button
lights up.
2. Spot Sequence
1. Press the SEQ button.
A sequence of single pictures is displayed in the order
and dwell time selected for the SEQ SETUP parameter
in the SEQUENCE SETUP menu.
Note: Refer to the Sequence Setup on page 15 for
more details.
25
VTR
CAM
ENTRANCE
SEQ
Example of spot camera picture sequence
Camera 3 Picture
Camera 6 Picture
2. To cancel a sequence, press the respective CAMERA
SELECT button.
The selected camera picture appears in spot mode.