Camera Download - Panasonic WJ-FS616 Operating Instruction

15. Daisy Mode
This item lets you select whether to have the video
signal connected to SPOT IN looped through to the
SPOT OUT connector (daisy-chain connection).
1. Move the cursor to the DAISY MODE parame-
ter.
2. Select ON or OFF by pressing the LEFT or
RIGHT button.
ON: Select this parameter if the Video
Multiplexer is daisy-chained.
OFF: Normal position.
The initial factory setting is OFF.
16. Unit Address
This item lets you assign a unit number for identifi-
cation when multiple Video Multiplexers are con-
nected in a system.
1. Move the cursor to the UNIT ADDR. SET para-
meter.
2. Select the desired unit number by pressing the
LEFT or RIGHT button.
The initial factory setting is 1.
After finishing the settings, press the SETUP/ESC
button to execute the settings and return to the pre-
vious SETUP MENU.

Camera Download

This item lets you save the camera setup data into
the memory of the Video Multiplexer.
If the setup contents of the camera should be lost
due to malfunctioning or replacement of a camera,
you can simply reload the data stored in the Video
Multiplexer.
1. Move the cursor to the CAM DOWNLOAD
parameter in the SETUP MENU.
2. Select YES by pressing the LEFT or RIGHT but-
ton,then press the SET button
The CAM DOWNLOAD table shown below
appears on the monitor screen.
DOWNLOAD
CAM 1
DATA O+
CAM 9 10 11 12 13 14 15 16
DATA -
O:RESULT OK
N:RESULT NG
CAUTION:ALL ALARM INPUTS
HAVE BEEN DISABLED.
3. Select the channel you want to edit by pressing
the LEFT or RIGHT button.
1CH - 16CH: Enables storing of setup data for
the selected camera channel.
ALL: Enables storing of setup data for all cam-
era channels.
Note: Channel numbers can also be input
directly with the Camera Number Buttons.
4. Move the cursor to "NO" by pressing the UP or
DOWN button.
5. Select "YES" by pressing the LEFT or RIGHT
button.
6. Press the SET button to begin loading. "NOW
LOADING" appears on the table.
To cancel loading, press the SETUP/ESC but-
ton.
7. When loading is finished, the result is dis-
played for each channel.
8. Press the SET UP/ESC button, then system will
restart.
Note: Alarm is disabled while this menu is dis-
played.
-36-
CAM DOWNLOAD
1CH NO
2 3 4 5 6 7 8
- O+ - - N- + -
- - - - - - -
+:DATA EXISTENCE
-:DATA NOTHING