Major Operating Controls And Their Functions; Front View - Panasonic WJ-DC108AD Operating Instructions Manual

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

Front View

POWER
ON
SWITCH
PROTECTER
OFF
1. Power Switch (POWER ON/OFF)
This switch is used to turn the Data Converter power
On or Off.
The indicator lights up when the power is turned on.
Switch Protector (Standard Accessory)
To prevent that the power of this appliance is turned
off accidentally, install the supplied switch protector
as shown below.
2. RS485 Address Switches (RS485-1, RS485-2)
These switches are used to set the camera address-
es connected to the RS485 Terminal.
Up to 1 024 addresses can be set in the system.
3. VD2/Cable Compensation Switches (CH1 - CH8)
These switches are used to set the most suitable
position of the cable-loss compensator and to turn
on and off the VD2 (Sync signal) for the cameras
connected to the CAMERA IN connectors.
4. Camera Address Switches (CH1 - CH8)
These switches are used to set the camera address-
es connected to the CAMERA IN connectors.
Up to 1 024 addresses can be set in the system.
-4-
Data Converter WJ-DC AD