Major Controls And Their Functions.12; Front Panel (Normal Mode).13 - Panasonic RAMSA WZ-AD96 Operating Instructions Manual

Chapter 2
MAJOR CONTROLS
and
THEIR FUNCTIONS
Buttons silk-printed half gray on the panel, here marked with < > brackets
are assigned double operation modes: normal mode and shift mode.
Indicators also have deferent function according to the operation modes.
During the < Shift Mode> all three Word Length Indicators light to identify
the operation mode. The < Shift Mode> operations are described after the
normal mode operations.
FRONT PANEL (NORMAL MODE)
(D
Power Switch and Power Indicator [POWER] ———
Turns on or off the power. The indicator lights while the power
power is on.
© Peak Hold LED Button [PEAK HOLD]
AD96 only
Peak hold time changes each time the button is pressed as follows.
0 second (LED: OFF) —> 2 seconds (LED: Green) peah
—> infinity(LED: Red) —» 0 second (LED: OFF) bsecl r—■
(oojlHJ
© Meter Mode Selection LED Button [METER ZOOM]
AD96
only
Meter mode toggles between the normal display and zoomed display
each time the button is pressed. mete
Normal (LED: OFF) Zoom (LED: Green) [o]
—
>
Normal (LED: OFF) I
AJST
®
Frequency Selection Button [FREQ]
When CLOCK is set to CRYSTAL the frequency is selected as
freq
follows every time the button is pressed. The respective indicator 44
m
itjIss^I
lights. 44.1k —» 48k
—>
88.2k —> 96k —> 44.1k
48k P | I 1
When CLOCK is set to EXT and the unit follows 48k or 96k, the
frequency is selected as follows every time the button is pressed. j •
The respective indicator lights. 48k —> 96k —> 48k j CH_SEL |
When CLOCK is set to EXT and the unit follows 44.1k or 88.2k,
the frequency is selected as follows every time the button is
pressed. The respective indicator lights. 44.1k —> 88.2k —> 44.1k
(D
Frequency Selection Indicator [FREQ] [44.1k 48k 88.2k 96k ]
The upper LED lights when 44.1 kHz (Green) or 88.2 kHz (Red) is selected.
The lower LED lights when 48 kHz (Green) or 96 kHz (Red)is selected.