Technical Information - Panasonic Viera TX-L37V20E Operating Instructions Manual

Technical Information

The optimum size and aspect can be chosen automatically, and you can enjoy finer images. (p. 18)
■
Aspect Control Signal
"WIDE" will appear in the top left of the screen if a Widescreen signal (WSS) or a Control signal through SCART /
HDMI terminal is found.
The aspect will switch to the appropriate 16:9 or 14:9 widescreen ratio.
This function will work in any aspect mode.
Input terminal
Satellite
Cable
RF
AV1 (Composite)
AV2 (Composite or S-Video)
AV3
COMPONENT
HDMI1
HDMI2
HDMI3
HDMI4
■
Auto mode
Auto mode determines the best aspect ratio to fill the screen. It does this using a four step process (WSS,
Control signal through SCART / HDMI terminal, Letterbox detection, or Justify to fill the screen) to determine.
This process may take several minutes, depending on the darkness of the image.
Letterbox detection: If black bands at the top and bottom of the screen are detected, Auto mode chooses the
best ratio and expands the image to fill the screen.
If no aspect signals are detected, Auto mode enhances the image for optimum viewing pleasure.
Note
●
The ratio varies depending on the programme, etc. If the ratio is out of the standard 16:9, black bands at the top
and bottom of the screen may appear.
●
If the screen size looks unusual when a widescreen-recorded programme is played back on a VCR, adjust the
tracking of the VCR. Read the manual of the VCR.
●
Use an SD Card which meets SD standards. If not, it may cause the TV to malfunction.
●
Do not remove the card while the TV is accessing data (this can damage card or TV).
●
Do not touch the pins on the back of the card.
●
Do not subject the card to a high pressure or impact.
●
Insert the card in the correct direction (otherwise, card may be damaged).
●
Electrical interference, static electricity, or erroneous operation may damage the data or
card.
●
Back up the recorded data at regular intervals in case of deteriorated or damaged data
86 or erratic operation of the TV. (Panasonic is not liable for any deterioration or damage of
recorded data.)
Auto Aspect
Input signal format
Widescreen signal
(WSS)
DVB-S
DVB-C
DVB-T
PAL B, G, H, I
PAL D, K
SECAM B, G
SECAM L, L'
SECAM D, K
PAL 525/60 6.5 MHz
PAL 525/60 6.0 MHz
PAL 525/60 5.5 MHz
M.NTSC 6.5 MHz
M.NTSC 6.0 MHz
M.NTSC 5.5 MHz
PAL
SECAM
PAL 525/60
M.NTSC
NTSC
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
525 (480) / 60i
525 (480) / 60p
625 (576) / 50i
625 (576) / 50p
750 (720) / 60p
750 (720) / 50p
1,125 (1,080) / 60i
1,125 (1,080) / 50i
1,125 (1,080) / 60p
1,125 (1,080) / 50p
1,125 (1,080) / 24p
SD Card
Aspect Control Signal
Control signal
through SCART (pin8) / HDMI terminal
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
2.1 mm
32 mm
24 mm