Panasonic Viera TX-L37V20E Operating Instructions Manual page 30

How to Use Menu Functions
Menu
SPDIF Selection
MPEG Optical Level
HDMI1 / 2 / 3 / 4 Input
SPDIF Delay
Reset to Defaults
Timer Programming
Off Timer
USB HDD Setup
VIERA Link
HDMI Content
Type
Q-Link
AV1 / AV2 out
Power on Link
Power off Link
Standby Power
Save
Intelligent Auto
Standby
Download
Child Lock
30
Item
SPDIF : A standard audio transfer file format
Selects the initial setting for digital audio output signal from DIGITAL AUDIO OUT terminal
(Auto / PCM)
Auto : Dolby Digital Plus and Dolby Digital are output as Dolby Digital Bitstream.
HE-AAC (48 kHz) 5.1ch is output as DTS.
MPEG is output as PCM.
PCM : Digital output signal is fixed to PCM.
●
For DVB mode, Network video contents (p. 73) or Video mode (p. 62)
Adjusts the audio level of MPEG output from DIGITAL AUDIO OUT terminal as the initial
setting (0 / -2 / -4 / -6 / -8 / -10 / -12dB)
●
Normally, MPEG sound is larger comparing with the other types of audio track.
●
DVB mode only
Select to fit the input signal (Digital / Analogue) (p. 89)
Digital
Analogue : HDMI-DVI adapter cable connection
●
HDMI input mode only
Adjusts the delay time of the sound output from DIGITAL AUDIO OUT terminal if the
sound does not synchronize the image
●
DVB mode only
Press the OK button to reset the present Sound Mode, Balance, Headphone Volume
and Surround to the default settings
Sets a timer to remind watching or record forthcoming programmes (p. 44)
●
DVB mode only
Sets the time the TV automatically goes to Standby mode
(Off / 15 / 30 / 45 / 60 / 75 / 90 minutes) (p. 19)
Register the connected USB HDD and makes the settings for the recording (p. 54)
Sets to use VIERA Link functions (Off / On) (p. 79)
Adjusts the picture settings according to the content type signal from the connected
equipment via HDMI cable (Off / Auto)
●
This function is available if the connected equipment supports HDMI Content Type.
●
The content type information will be displayed for several seconds when this function
works.
Selects which AV terminal is to be used for data communication between this TV and a
compatible recorder (AV1 / AV2) (p. 78)
●
Select the connected terminal to the recorder even it is not compatible with Q-Link.
Chooses the signal to be transmitted from the TV to Q-Link
(TV / AV1 / AV2 / AV3 / Monitor)
●
Monitor: Image displayed on screen
●
Component, PC and HDMI signals cannot be outputted.
Sets to use Power on Link function (Off / On) (p. 78 and p. 79)
Sets to use Power off Link function (Off / On) (p. 78 and p. 79)
Controls the power consumption in Standby mode of the connected equipment to
reduce the consumption (Off / On) (p. 80)
●
This function is available when "VIERA Link" is set to "On" and "Power off Link" is set
to "On".
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption (Off / On (With reminder) / On (No reminder)) (p. 80)
●
This function is available when "VIERA Link" is set to "On".
Downloads channel, language, country / region settings to a Q-Link or VIERA Link
compatible equipment connected to the TV
●
DVB-S and DVB-C channel settings cannot be downloaded.
Locks a channel / AV input to prevent access to it (p. 46)
Adjustments / Configurations (alternatives)
: HDMI cable connection