Displaying Pc Screen On Tv - Panasonic Viera TX-L37V20E Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the TV can be displayed on the TV.
You can also listen to PC sound with the audio cable connected.
●
To connect PC p. 84
INPUT
TV AV
■
To return to TV
TV
■
PC menu setting
●
To make settings "How to Use Menu Functions"
Menu Item
R-Gain
G-Gain
B-Gain
R-Cutoff
G-Cutoff
B-Cutoff
Gamma
Reset to Defaults
Input Resolution
Clock
H-pos
V-pos
Clock Phase
Sync
Reset to Defaults
●
Other items p. 28 - 33
Note
●
For HDMI-compatible PC, possible to connect to HDMI terminals (HDMI1 / HDMI2 / HDMI3 / HDMI4) by using
HDMI cable (p. 89).
Select the external input
1
AV
Select "PC"
2
Input Selection
AV1
AV2/S
AV3
COMPONENT
PC
HDMI1
HDMI2
HDMI3
HDMI4
TV
Media Server
Adjustments / Configurations (options)
Adjusts the white balance of bright red area
Adjusts the white balance of bright green area
Adjusts the white balance of bright blue area
Adjusts the white balance of dark red area
Adjusts the white balance of dark green area
Adjusts the white balance of dark blue area
Switches the gamma curve (1.8 / 2.0 / 2.2 / 2.4 / 2.6)
Press the OK button to reset to the default Advanced Settings
Switches to a wide view
●
VGA (640 × 480 pixels), WVGA (852 × 480 pixels),
XGA (1,024 × 768 pixels), WXGA (1,280 × 768 pixels, 1,366 × 768 pixels)
●
Options change depending on signals
Set to the minimum level if noise occurs
Adjusts horizontal position
Adjusts vertical position
Eliminates flicker and distortion
●
Adjust after Clock adjustment
Chooses another synchronous signal if the image is distorted (H & V / On Green)
●
H & V : by the horizontal and vertical signals from your PC
On Green : by the green signal from your PC (if available)
Press the OK button to reset to the default PC Setup settings
●
Corresponding signals
●
If "H-freq." or "V-freq." is shown in red,
the signals may not be supported.
to (p. 27)
●
Set to the minimum level if noise occurs
access
select
p. 90
51