Viera Link - Panasonic Viera TX-L37V20E Operating Instructions Manual

Link Functions
■
Preparations
●
Connect the DVD Recorder / VCR with the following logos:
"Q-Link", "NEXTVIEWLINK", "DATA LOGIC", "Easy Link", "Megalogic" or "SMARTLINK"
●
Q-Link connection
●
Use fully wired SCART cable.
●
Set up the DVD Recorder / VCR. Read the manual of the recorder.
●
Q-Link terminal setup in the Setup Menu
●
Download preset - channel, language, country / region settings
■
Features available
Preset download
Channel, language, country / region settings can be downloaded to the recorder.
●
DVB-S and DVB-C channel settings cannot be downloaded.
●
To download settings
Direct TV Recording -
Recording the current programme in DVD Recorder / VCR immediately.
Power on link and Easy playback
Set Power on Link "On" in the Setup Menu to use this function
When DVD Recorder / VCR starts playback or direct navigator / function menu for the equipment
are activated, the TV is turned on and input mode is switched automatically so that you can view the
content. (Only when the TV is in Standby mode.)
Power off link
Set Power off Link "On" in the Setup Menu to use this function
When TV is set to Standby mode, the recorder is also automatically set to Standby. (Only when the
videocassette or disc is not active.)
●
This function will work even if the TV enters Standby mode automatically by auto power standby function.
• "DATA LOGIC" (a trademark of Metz Corporation)
• "Easy Link" (a trademark of Philips Corporation)
Note
●
78 Some recorders are not applicable. Read the manual of the recorder.
p. 76
"Download" (p. 30) or "Auto Setup" (p. 37) or "Auto Setup" - when first using the TV
(p. 12 and p. 13)
What you see is What you record
●
Available conditions:
DIRECT TV REC
DIRECT TV REC
EXIT
●
When Direct TV Recording is performed, the recorder is automatically
turned on if it is in Standby mode.
●
Changing channel or turning off the TV is available while the recorder is
recording from its own tuner.
●
Changing channel is not available while the recorder is recording from
the TV tuner.
■
(
Q-Link

VIERA Link

Q-Link
"Q-Link" (p. 30), "AV1 / AV2 out" (p. 30)
Current mode
Analogue
DVB
AV
( watching recorder's tuner)
AV
( watching recorder's external input)
AV
( watching TV's external input)
To stop recording
Unlock the tuner
Tuner Locked
Press EXIT to unlock and stop recording
Continue
• "Megalogic" (a trademark of Grundig Corporation)
• "SMARTLINK" (a trademark of Sony Corporation)
)
"Preset download" (see below)
Using tuner How to record
TV TV monitor out
Recorder Recorder's tuner
TV TV monitor out
Recorder Recorder's tuner
Recorder's
–
external input
– TV monitor out
EXIT
Unlock
"Power on Link" (p. 30)
"Power off Link" (p. 30)