Panasonic Viera TX-L37V20E Operating Instructions Manual page 21

■
Other useful functions
View details of the programme (DVB mode)
Select the programme
select
Timer Programming (DVB mode)
Timer Programming is a timer to remind watching or record the programme to the external recorder
or the USB HDD.
Select the Select the function
(Ext Rec., USB HDD Rec. or Reminder)
forthcoming
programme
Timer Programming
F u n c t i o n
select
set
Ext Rec. /
USB HDD Rec.
Reminder
■
To check / change / cancel a timer programming event
■
To return to TV Guide
■
If you select the current programme
A confirmation screen whether you wish to watch or record it will appear.
Select "Timer Programming" and set "Ext Rec." or "USB HDD Rec." to
record from the time you finish the timer programming event setting.
Note
●
This function is not available in Analogue mode.
●
Timer Programming only works reliably if correct time information is received via the signal from the
broadcaster or service provider.
●
No other channel can be selected while the recording of Timer Programming is in progress.
●
When recording programmes to the external recorder, be sure to make the proper settings on the recorder
connected to the TV.
If a compatible recorder with Q-Link, VIERA Link or similar technologies is connected to the TV (p. 78 and
p. 79) and the "Link Settings" (p. 30) are completed, no setting of the recorder is required. Also read the
manual of the recorder.
●
When recording programmes to the USB HDD, be sure to register the USB HDD and enable it for recording in
the "USB HDD Setup" (p. 54).
View advertisement
Depending on the country you select, this TV supports the GUIDE Plus+ system in DVB-T or
Analogue mode
The postcode entry or update is required. Follow the on screen instructions.
●
Also possible to setup manually from the Setup Menu
"Update" / "Postcode" in "GUIDE Plus+ Settings" (p. 33)
●
Enter your postcode when using this function for the first time. If you enter an incorrect postcode for your
area, or no postcode is entered, advertisements may not be displayed correctly.
Display advertisement information
OPTION
■
To change advertisements
Note
●
To update the information continuously, the TV must be left in Standby mode at night.
View details
Wed 28.10.2009 10:46
N o . C hann el Name Date Start
Ext Rec. D 1 BBC ONE Wed 28.10.2009 20:00
<T IMER > (30 min.)
- - - --- --/-- --:--
( --- min.)
- - - - -- --/-- --/-- --:-- --:--
(--- min.)
- - - - -- --/-- --:--
(--- min.)
- - - --- --/-- --:--
(--- min.)
(Timer Programming screen)
: to record the programme to the external recorder (Ext Rec.) or the
USB HDD (USB HDD Rec.)
When the start time comes, the channel will be switched automatically
and the video and audio signals will be output. 2 mins. before the starting
time, a reminder message appears if you are watching TV.
: to remind watching the programme
When you are watching TV, a reminder message appears 2 mins. before
the start time. Press the OK button to switch to the programmed channel.
BACK/
RETURN
●
To display the latest advertisement
"Update" in "GUIDE Plus+ Settings" (p. 33)
TV Guide: Landscape
Wed 28.10.2009
10:46
Wed 28.10.2009
DIY SOS
BBC ONE
20:00 - 20:30, 30 min.
Return to list
EXIT
Timer Programming
RETURN
store
End
20:30
--:--
select
LED will turn to orange if
--:-- --:--
Timer Programming is set.
--:--
--:--
(Orange LED will flash if the recording
of Timer Programming is in progress.)
"Timer Programming" (p. 45)
Das Erste
19:30- 20:00
■
To return to TV Guide
●
Press again to return
to TV Guide.
Details
View Timer Programming
BACK/
OPTION
RETURN
or
LED
select
access
21