Panasonic Viera TX-L37V20E Operating Instructions Manual page 70

Using Network Services
(DLNA / VIERA CAST)
Network settings for the Wireless LAN connection
This setting is for the network connection by using Wireless LAN Adaptor. (Wireless LAN connection)
●
Confirm the encryption key, settings and positions of your access point before starting setup. For details, read
the manual of the access point.
Select "Network Type" and set to "Wireless"
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Select "Access Point Settings"
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Select the connection type and set
Connection Type
Please select network connection type.
Search for access point
Confirm the connection status of "Access Point Settings"
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Select "Connection Test" and access to test
Network Setup
Network Type
Access Point Settings
IP/DNS Settings
Proxy Settings
Connection Test
VIERA Name
Software Update
MAC Address
Performs automatic testing of the network
connection for the TV. (It takes a while to test.)
70
Wireless
No settings
VIERA
ab-cd-ef-gh-ij-kl
Wireless
No settings
VIERA
ab-cd-ef-gh-ij-kl
WPS(Push button)
WPS(PIN)
After settings, return to "Network Setup" screen
Manual
- - -
Wireless
No adaptor
Connected
No settings
Connecting... : Connecting to the access point in progress.
VIERA
Connected
ab-cd-ef-gh-ij-kl
USB
overcurrent
Wireless
Connected
Access
VIERA
ab-cd-ef-gh-ij-kl
set
select
access
select
●
access
For details of each connection type
select
: "Wired" is selected in "Network Type".
: Wireless LAN Adaptor is not connected.
: Setting for connecting to the access point has not been set.
: Wireless LAN connection to the access point succeeded
●
To display the current access point settings, press the OK
button.
To change the settings, select "No" on this screen.
●
Some access points do not allow access to the internet.
Perform "Connection Test" (below) to check if internet
connection is available.
: Overcurrent error
access
Connection Test
Check access point connection.
Check acquired IP address.
Check for devices using same IP address.
select
Check gateway connection.
Check server connection.
: succeeded
The test is successful and the TV is connected to the
network.
: failed
Check the settings and connections, and then perform
this function again.
If you continue to have difficulty, please contact your
internet service provider.
p. 93
p. 71