Panasonic Viera TX-L37V20E Operating Instructions Manual page 35

DVB-S Tuning Menu
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel Message On
Signal Condition
Antenna System DiSEqC1.0
LNB Configuration Access
Select "Antenna System" and set
You can receive several satellites if you have DiSEqC control antenna system.
●
This TV supports DiSEqC Version 1.0.
DVB-S Tuning Menu
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel Message On
Signal Condition
Antenna System DiSEqC1.0
LNB Configuration
Select "LNB Configuration"
DVB-S Tuning Menu
Favourites Edit
Channel List
Auto Setup
Manual Tuning
Update Channel List
New Channel Message On
Signal Condition
Antenna System DiSEqC1.0
LNB Configuration Access
Select "LNB" and set one of the LNBs
LNB Configuration
Signal Quality 0
Analogue Scan Signal Strength 0
Analogue Scan LNB 21
AA
LNB Low Band Frequency 9750 MHz
LNB High Band Frequency Analogue Scan 21
10600 MHz
Satellite No Satellite
Test Transponder Frequency Analogue Scan 21 10700 MHz
Select "Satellite" and set
Set the connected satellite for the selected LNB.
LNB Configuration
Signal Quality 0
Signal Strength Analogue Scan 0
LNB Analogue Scan 21 AA
LNB Low Band Frequency 9750 MHz
Analogue Scan LNB High Band Frequency 21
10600 MHz
Satellite Astra 19.2° E
Test Transponder Frequency Analogue Scan 21
10744 MHz
Store
BACK/
RETURN
■
Selectable satellites and dish alignment to tune DVB-S channels:
• Turksat at 42° East
• Hellas at 39° East
• Astra at 28.2° East
• Arabsat at 26° East
• Astra at 23.5° East
• Astra at 19.2° East
●
To ensure your satellite dish is correctly installed, please consult your local dealer.
●
Also please consult the received satellite broadcasting companies for details.
set
select
access
select
10
set
10 68
select
68
10
set
10 68
select
68
• Eutelsat at 16° East
• Hot Bird at 13° East
• Eutelsat at 10° East
• Eurobird at 9° East
• Eutelsat at 7° East
• Sirius at 5° East
One LNB
compatible with single LNB
MiniDiSEqC
up to 2 LNBs can be controlled
DiSEqC1.0
up to 4 LNBs can be controlled
Single Cable
When using the Single Cable router, up to 8 user
bands are available.
●
If you set to "One LNB"
not selectable
●
If you set to "MiniDiSEqC" or "Single Cable"
select between LNB AA and AB
●
If you set to "DiSEqC1.0"
select between LNB AA, AB, BA and BB
●
Select "No Satellite" if you do not know the
connected satellite (available satellite will be
searched in Auto Setup).
●
Select "User defined" to set "Test Transponder
Frequency" manually.
●
If you set to "Single Cable", additional settings
are required. Set "User Band", "User Band
Frequency" and "PIN" (depending on the
Single Cable router you use).
For details, read the manual of the Single
Cable router.
• Thor at 0.8° West / Intelsat at 1° West
• Amos at 4° West
• Atl. Bird at 5° West
• Atl. Bird at 7° West
• Atl. Bird at 8° West
• Hispasat at 30° West
35