Technical Information - Panasonic Viera TC-37LZ85 Operating Instructions Manual

Technical Information
® For viewing the CC of digital broadcasting, set the aspect to FULL (If viewing with H-FILL, JUST, ZOOM, or 4:3;
characters might be cut off).
® The CC can be displayed on the TV if the receiver (such as a set-top box or satellite receiver) has the CC set On
using the Component or HDMt connection to the TV.
@ If the CC is set to On on both the receiver and TV when the signal is 480i (except for the HDMt connection), the CC
may overlap on the TV.
@ If a digital program is being output in analog format, the CC data will also be output in analog format.
@ If the recorder or output monitor is connected to the TV, the CC needs to be set up on the recorder or output
monitor.
Lets you choose the aspect depending on the format of the received signal and your preference. (p. 16)
(e.g.: in case of 4:3 image)
@ FULL
I_------ 4 -----_1 I, 16 ,I
Enlarges the 4:3 image horizontally to the screen's side edges.
(Recommended for anamorphic picture)
@ H-FILL
I-,------ 4 -----_1 I, 16 ,1
Enlarges the 4:3 image horizontally to the screen's side edges.
The side edges of the image are cut off.
@ ZOOM
I_ 4 -_,-I I, 16
=1
Enlarges the 4:3 image to the entire screen.
(Recommended for Letter Box)
@JUST
I_ 4 _1 @------- 16-------_1
Stretches to justify the 4:3 image to the four corners of the
screen.
(Recommended for normal TV broadcast)
@4:3
I_------ 4 ------_1
]
bar
Standard
@480i (4:3), 480i (16:9), 480p (4:3), 480p (16:9):
FULL, JUST, 4:3 or ZOOM
÷ 1080p / 1080i / 720p:
FULL, H-FILL, JUST, 4:3 or ZOOM
@Zoom adjust
Vertical image position and size can be adjusted in "ZOOM".
(_ Select "Zoom adjust" on the "Picture" menu. (p. 22-23)
@ V-position: Vertical position adjustment (3) V-size: Vertical size adjustment
@To reset the aspect ratio ÷ (OK)
40