Displaying Pc Screen On Tv; How To Use Menu Functions (Picture, Sound Quality, Etc.) - Panasonic Viera TC-L32X2 Operating Instructions Manual

Displaying PC Screen on TV

The screen of the PC connected to the unit can be displayed on the TV.
You can also listen to PC sound with the audio cable connected. To connect PC (p. 43)
Display the Input select menu
Select "PC"
To return to TV
PC menu setting (change as desired)
Making settings "How to Use Menu Functions"
Menu Item
Reset to defaults
Resets PC adjust. Confirmation screen is displayed. Select "Yes" and press OK to reset.
H & V:
Sync
On green: Uses a synchronized signal on the Video G signal, which is input from the
Dot clock
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or is blurred.
Adjusts the horizontal position.
H-position
Adjusts the vertical position.
V-position
PC
adjustments
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the
Clock Phase so that a clear picture appears.
Clock phase
Note
It may not be possible to display a clear picture due to poor input signals.
Switches to wide display.
Input
Input signal switched from 640×480 to 852×480
resolution
Input signal switched from 1024×768 to 1280×768 or 1366×768
Displays the H (Horizontal)/V (Vertical) frequencies.
H-frequency
Display range
V-frequency Horizontal: 15 - 110 kHz
Vertical:
26
Audio menu (p. 28)
Input select
TV
1
HDMI 1 GAME
2
3 HDMI 2
HDMI 3 GAME
4
Component AUX
5
6 Video 1
7 Video 2 GAME
PC
8
(example)
Corresponding signals
PC
(p. 48)
Displays
PC screen
/
to (p. 27)
Adjustments/Configurations (options)
The H and V sync signals are input from the HD/VD connector. (p. 49)
G connector. (p. 49)
48 - 120 Hz
How to Use Menu Functions
Various menus allow you to make settings for the picture, sound, and other functions so that you can enjoy
watching TV best suited for you.
Display the menu
Menu structure
Menu
Input labels
HDMI 1
HDMI 2
HDMI 3
Component
Video 1
Video 2
PC
Select or enter the name of the device
connected to the HDMI 1 terminal.
Edit
Select
Change
RETURN
R G ABC abc B
(example: Input labels)
Select the menu
Menu
Picture
Reset to defaults
Picture mode
Back light
Contrast
Select the item
Menu Picture
Reset to defaults
Picture mode
Back light
Contrast
Brightness
Color
Tint
Press to exit from
Sharpness
a menu screen
Resets all picture adjustments to factory
default settings except for "Advanced
picture".
(example: Picture menu)
Adjust or select
Press to return
Menu
Picture
to the previous
Reset to defaults
screen
Picture mode
Back light
Contrast
Brightness
Color
Tint
Sharpness
Selects from preset picture modes.
(example: Picture menu)
Shows the functions that can be adjusted.
Some functions will be disabled depending on
the type of input signal.
Menu bar
Press OK to move to the Menu items.
Menu items
Press OK to proceed to next screen if
available.
Help information
1 @. 2 3
ABC DEF
4 5 6
GHI JKL MNO Operation guide
7 8 9
PQRS TUV WXYZ
0 - ,
LAST
Y Delete
select
1/2
Custom
20
next
0
select
1/2
Custom
20
0
0
0
0
0
1/2
adjust
Vivid
or
20
select
0
0
0
0
0
27