Konica Minolta BIZHUB PRO 920 Scanner Manual page 120

8
5
In the [Scanner Selection] window, select the [Box No.] in which the
scanned data you import are stored, and click the [Connect].
6
Select a file from the file list shown in
the [KONICA MINOLTA Scanner
Driver] window, then click the [Read-
ing] to allow the selected file to be
read in.
– By default, the file is cleared from
the controller's hard disk immedi-
ately after the file is fully read in. If
you want, you can override this
default setting so that the file is
held in the hard disk.
– Refer to "Features and Settings of the Network Scanner Driver" on
page 8-14 about the settings.
– Refer to "Deleting images stored on the HDD" on page 8-13 about
how to delete scanned data.
– Only data for which TIFF was selected as the file form is displayed.
The selected file is read from the hard disk.
7
You can open the read-in document within the application for editing/
saving.
8-12
Configuring the Network Scanner features
bizhub PRO 920 Scanner