Konica Minolta BIZHUB 500 User Manual page 143

Specifying Settings From the Control Panel
13
Touch [Password] and type in the password using the keyboard that
appears on the screen.
14
Touch [OK].
15
Touch [Index] and touch the desired button.
– This specifies the characters used to index the destination.
– For destinations that are often used, specify [Main] at the same
time, and it will be easier to search.
– If the first character of the name is a letter, the first character is
automatically registered as the indexing character.
– The registration cannot be completed unless settings have been
specified for "Host Address", "File Pass", "User ID", and
"Password".
16
Touch [OK], and then touch [OK] in the next screen that appears.
The SMB destination is registered.
bizhub 500/420
4
4-21