About the Network Scanner Driver
5
In the [Scanner Selection] window, select the [Box No.] in which the
scanned data you import are stored, and click the [Connect].
6
Select a file from the file list shown in
the [KONICA MINOLTA Scanner
Driver] window, then click the [Read-
ing] to allow the selected file to be
read in.
–
By default, the file is cleared from
the HDD-B immediately after the
file is fully read in. If you want, you
can override this default setting
so that the file is held in the hard
disk.
–
Refer to "Features and Settings of the Network Scanner Driver" on
page 8-11 about the settings.
–
Refer to "Deleting images stored on the HDD-B" on page 8-10
about how to delete scanned data.
–
Only data for which TIFF was selected as the file form is displayed.
The selected file is read from the HDD-B.
7
You can open the read-in document within the application for editing/
saving.
bizhub PRO 920 Scanner
8
8-9