Table of Contents
Advertisement
5
No.
Name
5
PRINT DENSITY
6
LCD CONTRAST
7
LANGUAGE
8
LAMP OFF TIME
5-2
Description
The copy/print density can be adjusted to one of six levels
between –3 and +2. With the normal print density at 0, choose
a smaller number for a lighter print or choose a higher number
for a darker print.
• The factory default setting is "0" (Normal).
The brightness of the display can be set to one of four levels
between –1 and +2.
• The factory default setting is "0" (Normal).
The display language can be selected.
• The factory default setting is "English".
The time until the exposure lamp goes off can be adjusted.
Mode 1:When four hours have passed since the last operation
was performed
Mode 2:When the machine enters Energy Save mode
• The factory default setting is "Mode 1".
Using the Utility Mode
7416CG
Advertisement
Table of Contents
