Konica Minolta 7416CG User Manual page 115

Hide thumbs Also See for 7416CG:
Table of Contents

Advertisement

6
Symptom
The edge of the copy is dirty.
* If the problem is not corrected even after the operations described above are performed,
contact your service representative.
6-22
Possible Cause
The Original Pad is dirty.
You have selected paper of a
size larger than the original
(when the zoom ratio is full
size).
The original is not placed in
the correct position (when
the zoom ratio is full size).
The reduction ratio selected
does not match the paper
size (when the copy is made
at a manually adjusted
reduction ratio).
When a Message Appears
Action
Wipe the Original Pad clean
with a soft cloth dampened
with neutral detergent.
Select paper that is the same
size as the document.
Otherwise, enlarge the copy
to the selected paper size.
Select the same paper size
as the original. Or, reload the
paper in the same direction
as the original.
Select a zoom ratio that
adjusts the copy size to the
size of the selected paper.
Otherwise, make a reduced
copy with a zoom ratio that
matches the paper size.
7416CG

Advertisement

Table of Contents
loading

Table of Contents