Table of Contents
Advertisement
Using the Utility Mode
5
Using the Utility Mode
5.1
Utility Mode
There are three menus in the Utility mode.
No.
Name
1
MACHINE
SETTING
2
PAPER SOURCE
SETUP
3
COPY SETTING
5.2
Specifying the Machine Settings
From the "MACHINE SETTING" menu, various settings for the machine' s
operating environment can be specified. Refer to the following table for
details on each function.
No.
Name
1
AUTO PANEL
RESET
2
ENERGY SAVE
MODE
3
DENSITY (ADF)
4
DENSITY (BOOK)
7416CG
Description
Used to specify settings for the machine' s operating
environment.
Used to specify the size and type of paper loaded in Tray1. In
addition, auto tray switching can be enabled for each tray.
Used to specify the default settings for each copy function.
Description
Whether the Auto Panel Reset function is disable or the time
(0.5 min, 1 min, 2 min, 3 min, 4 min, or 5 min) until the machine
is reset after finishing copying/printing or after performing the
last operation can be selected. If the Auto Panel Reset function
is enabled, all functions are automatically reset to their default
settings.
• The factory default setting is 1 min.
If the machine performs no operations for a set length of time,
it will automatically enter the Energy Save mode. The length of
time until the machine enters Energy Save mode can be set
between 1 and 240 min (in 1 min increments).
• The factory default setting is 15 min.
The scanning density when using the Auto Document Feeder
can be adjusted.
Mode 1: For printing lighter copies of dark documents to avoid
darkening of copies.
Mode 2: For printing copies with same density as documents.
• The factory default setting is "Mode 1".
The density when scanning from the Original Glass can be
adjusted.
Mode 1: For printing copies with same density as documents.
Mode 2: For printing lighter copies of dark documents to avoid
darkening of copies.
• The factory default setting is "Mode 1".
5
5-1
Advertisement
Table of Contents
